code sync

tool/plugin/i2c_m7.sh

@@ -6,8 +6,14 @@ slave=$3
 data=$4
 rc=$5
 
+path=`pwd`
+fmt_print="${path}/format_print.sh"
+
 if [ $rc -eq 0 ];then
-    i2ctransfer - y $i2c_bus w$wc@$slave $data
+    cmd="i2ctransfer -y $i2c_bus w$wc@$slave $data"
 else
-    i2ctransfer - y $i2c_bus w$wc@$slave $data r$5
+    cmd="i2ctransfer -y $i2c_bus w$wc@$slave $data r$5"
 fi
+
+$fmt_print "log" "Info" "[M7 i2c Command]: $cmd"
+$cmd

tool/plugin/nicsensor.sh

@@ -6,6 +6,7 @@ server_platform="m7"
 slot_name=$1
 sensor_type=$2
 chip_slave=$3
+param_num=$#
 
 nic_type=""
 slot_id=""
@@ -16,8 +17,18 @@ sensor_script="${path}/plugin_${sensor_type}.sh"
 i2c_script="${path}/i2c_${server_platform}.sh"
 fmt_print="${path}/format_print.sh"
 
+print_helper(){
+    echo "Usage     : ./nicsensor.sh [slot] [sensor] [i2c slave]"
+    echo "For Detect: ./nicsensor.sh detect [ocp/pcie]"
+}
+
 conf_pre_check(){
 
+    if [ $param_num -lt 1 ];then
+        print_helper
+        exit 0
+    fi
+
     # init debug log
     if [ -e "/tmp/nicsensor_debug.log" ];then
         rm /tmp/nicsensor_debug.log
@@ -29,12 +40,12 @@ conf_pre_check(){
     fi
 
     if [ ! -e $server_script ];then
-        $fmt_print "console" "Error" "$server_script not exist!"
+        $fmt_print "console" "Error" "Server Script $server_script not exist! Maybe unsupport for now!"
         exit 1
     fi
 
     if [ ! -e $sensor_script ];then
-        $fmt_print "console" "Error" "$sensor_script not exist!"
+        $fmt_print "console" "Error" "Sensor Script $sensor_script not exist! Maybe unsupport for now!"
         exit 1
     fi
 
@@ -74,6 +85,8 @@ connect_i2c(){
 
 start_sensor_reading(){
     $fmt_print "log" "Info" "start sensor reading"
+    
+    $sensor_script "read" "${i2c_bus}" "${chip_slave}" "${server_platform}"
 }
 # ---------------------------------------------------------
 #  Start Execute Script
@@ -82,7 +95,7 @@ conf_pre_check
 
 parse_slot_name
 
-connect_i2c
+i2c_bus=`connect_i2c`
 
 start_sensor_reading
 

tool/plugin/platform_5280m7.sh

@@ -81,7 +81,7 @@ get_pca9641_control(){
 
 select_pca9548_channel(){
     $fmt_print "log" "Info" "[platform_5280m7] Start Switch PCA9548"
-    # $i2c_script "$i2c_bus" 1 "$pca9548_slave" "$pca9548_channel" 0
+    $i2c_script "$i2c_bus" 1 "$pca9548_slave" "$pca9548_channel" 0
 }
 
 build_i2c_connect(){

tool/plugin/plugin_tmp112.sh

@@ -1,5 +1,16 @@
 #!/bin/sh
 
+mode=$1
+i2c_bus=$2
+chip_slave=$3
+server_platform=$4
+
+path=`pwd`
+fmt_print="${path}/format_print.sh"
+i2c_script="${path}/i2c_${server_platform}.sh"
+
+sensor_name="TMP112"
+
 # @Param1 tmp112 data high 8bit
 # @Param2 tmp112 data low 8bit
 # @Param3 customization sensor name
@@ -34,5 +45,17 @@ convert_tmp112_data(){
     echo "$3 : $temp"
 }
 
-# E.G. ./plugin_tmp112.sh 0x08 0x40 temp
-convert_tmp112_data $1 $2 $3
+read_tmp112_data(){
+    res=`$i2c_script $i2c_bus "1" "$chip_slave" "0x00" "2"`
+    convert_tmp112_data $res "$sensor_name"
+}
+
+
+case "${mode}" in
+    "read")
+        read_tmp112_data
+        ;;
+    *)
+        $fmt_print "console" "Error" "[plugin_tmp112]Unexpected Input Param : $mode"
+        ;;
+esac