feat(master) update to 1.10 base dev 2

1.[新增功能]解耦脚本参数配置功能, 脚本配置全部放到project.config中
2.[新增功能]增加对pmbus set命令的支持
3.[新增功能]增加setup.sh, 用于一键部署脚本
4.[功能优化]代码结构目录重新归档

docs/change_list.txt

@@ -1,3 +1,10 @@
+# Script Version 1.11
+  #Release Note
+    1.[新增功能]解耦脚本参数配置功能, 脚本配置全部放到project.config中
+    2.[新增功能]增加对pmbus set命令的支持
+    3.[新增功能]增加setup.sh, 用于一键部署脚本
+    4.[功能优化]代码结构目录重新归档
+
 # Script Verison 1.10
   Release Note
     1.[新增功能]新增适配传感器 ina226, lm95241

extension/pmbus_cmd_list.sh

@@ -1,14 +1,12 @@
 #!/bin/sh
 
 # Desc       : This script used to find pmbus code and read size
-# Todo       : Support PMBUS Setting Function
-# Version    : 0.1
-# Date       : 2025-12-25
 # Changelist : 2025-12-25|v0.1 Create this file
+#              2026-04-17|v1.1 Add PAGE command support
 
 # How to use this pmbus plugin?
-#   Copy this file to the dir as same as nicsensor.sh
+#   Follow readme.md file to use this plugin or use setup.sh to install this plugin
-EXTENSION_VERSION="v1.0"
+EXTENSION_VERSION="v1.1"
 # ---------------------------------------------------------
 # Varible Define
 # ---------------------------------------------------------
@@ -28,15 +26,18 @@ PMBUS_RAW=4
 pmbus_command_help(){
     echo "  Extend Function - PMBUS command test"
     echo "      Version : $EXTENSION_VERSION"
-    echo "   1) Command Format   : ./nicsensor.sh [slot] pmbus [slave] [command]"
+    echo "   1) Command Format   : ./nicsensor.sh [slot] pmbus [slave] [command] <data>"
     echo "   2) Option Detail"
     echo "       - [slot]        : 0 1 2 3 4 5 ..."
     echo "       - [slave]       :  power manage chip slave address , please provide 7 bit address"
     echo "       - [command]     : The pmbus command which will set to the power manage chip"
+    echo "       - <data>        : The data which will set to the power manage chip, only set operation type is set"
     echo "   3) E.G.             : ./nicsensor.sh pcie1 pmbus 0x60 READ_TEMPERATURE_1"
+    echo "                       : ./nicsensor.sh pcie1 pmbus 0x60 PAGE 0x00"
     echo ""
     echo "     *****************Pmbus Support Command List********************"
     echo "      Command Name              Code    op_type   Read Size         "
+    echo "      PAGE                      0x00     set      Byte              "
     echo "      READ_VIN                  0x88     get      Word              "
     echo "      READ_IIN                  0x89     get      Word              "
     echo "      READ_VOUT                 0x8b     get      Word              "
@@ -52,6 +53,9 @@ pmbus_command_help(){
 
 find_pmbus_hex_code(){
     case ${str_cmd} in
+        "PAGE")
+            hex_cmd=0x00
+        ;;
         "READ_VIN")
             hex_cmd=0x88
         ;;
@@ -88,6 +92,9 @@ find_pmbus_hex_code(){
 
 find_pmbus_operation_type(){
     case ${str_cmd} in
+        "PAGE")
+            op_type="set"
+        ;;
         "READ_VIN")
             op_type="get"
         ;;
@@ -124,6 +131,9 @@ find_pmbus_operation_type(){
 
 find_pmbus_read_size(){
     case ${str_cmd} in
+        "PAGE")
+            read_size=$PMBUS_BYTE
+        ;;
         "READ_VIN")
             read_size=$PMBUS_WORD
         ;;

extension/stress_test.sh

@@ -4,7 +4,7 @@
 # Detail: This script will stress test the nicsensor by reading the sensor data
 #         and print the result to the console.
 
-EXTENSION_VERSION="v1.0"
+EXTENSION_VERSION="v1.0 Base Dev 1"
 
 # ---------------------------------------------------------
 # Varible Define
@@ -120,9 +120,9 @@ start_stress_test(){
     if [ -f ${CONFIG_NICSENSOR} ]; then
         config_tool=$(cat ${CONFIG_NICSENSOR})
     else
-        config_tool="nicsensor.sh"
+        config_tool="/extlog/nicsensor/nicsensor.sh"
     fi
-    if [ ! -f "./${config_tool}" ]; then
+    if [ ! -f "${config_tool}" ]; then
         echo "Error: ${config_tool} tool not found"
         echo "Info : Please check the nicsensor tool path and name"
         return 1
@@ -131,27 +131,27 @@ start_stress_test(){
     # option check
     if [ ! -f ${CONFIG_ROUND} ]; then
         echo "Error: Round is not set"
-        echo "Info : Please set the stress test round first, use command: ./nicsensor.sh [slot] stress round [data]"
+        echo "Info : Please set the stress test round first, use command: ${config_tool} [slot] stress round [data]"
         return 1
     fi
     if [ ! -f ${CONFIG_INTERVAL} ]; then
         echo "Error: Interval is not set"
-        echo "Info : Please set the stress test interval first, use command: ./nicsensor.sh [slot] stress interval [data]"
+        echo "Info : Please set the stress test interval first, use command: ${config_tool} [slot] stress interval [data]"
         return 1
     fi
     if [ ! -f ${CONFIG_SLOT} ]; then
         echo "Error: Slot is not set"
-        echo "Info : Please set the stress test slot first, use command: ./nicsensor.sh [slot] stress slot [data]"
+        echo "Info : Please set the stress test slot first, use command: ${config_tool} [slot] stress slot [data]"
         return 1
     fi
     if [ ! -f ${CONFIG_SENSOR} ]; then
         echo "Error: Sensor is not set"
-        echo "Info : Please set the stress test sensor first, use command: ./nicsensor.sh [slot] stress sensor [data]"
+        echo "Info : Please set the stress test sensor first, use command: ${config_tool} [slot] stress sensor [data]"
         return 1
     fi
     if [ ! -f ${CONFIG_SLAVE} ]; then
         echo "Error: Slave is not set"
-        echo "Info : Please set the stress test slave first, use command: ./nicsensor.sh [slot] stress slave [data]"
+        echo "Info : Please set the stress test slave first, use command: ${config_tool} [slot] stress slave [data]"
         return 1
     fi
 
@@ -170,9 +170,10 @@ start_stress_test(){
 
     run_count=1
     while [ ${run_count} -le ${config_round} ]; do
+        echo ""
         timestamp=$(date +"%Y-%m-%dT%H:%M:%S")
         echo "====== ${timestamp}, Run Count: ${run_count}"
-        exec_cmd="./${config_tool} ${config_slot} ${config_sensor} ${config_slave}"
+        exec_cmd="${config_tool} ${config_slot} ${config_sensor} ${config_slave}"
         ${exec_cmd}
         sleep ${config_interval}
         run_count=$((run_count+1))

nicsensor.sh

@@ -1,65 +1,75 @@
 #!/bin/sh
 set -eo pipefail
-SCRIPT_VERSION="1.10"
+SCRIPT_VERSION="1.10 Base Dev 2"
+
+# Load project config file
+PROJECT_VARIBLE_CONFIG="/extlog/nicsensor/project.config"
+PROJECT_CONFIG_STATUS=0
+
+if [ -f $PROJECT_VARIBLE_CONFIG ]; then
+    . $PROJECT_VARIBLE_CONFIG
+    PROJECT_CONFIG_STATUS=1
+fi
 # ---------------------------------------------------------
-# Project Feature Varible (Change if need)
+# Project Feature Varible 
+# Use default value if not set
 # ---------------------------------------------------------
 # ADC128 Division factor
-votage_division_factor_0="1"
+votage_division_factor_0="${votage_division_factor_0:-1}"
-votage_division_factor_1="1"
+votage_division_factor_1="${votage_division_factor_1:-1}"
-votage_division_factor_2="1"
+votage_division_factor_2="${votage_division_factor_2:-1}"
-votage_division_factor_3="0.8"
+votage_division_factor_3="${votage_division_factor_3:-0.8}"
-votage_division_factor_4="0.6"
+votage_division_factor_4="${votage_division_factor_4:-0.6}"
-votage_division_factor_5="0.6"
+votage_division_factor_5="${votage_division_factor_5:-0.6}"
-votage_division_factor_6="0.2326"
+votage_division_factor_6="${votage_division_factor_6:-0.2326}"
-votage_division_factor_7="1"
+votage_division_factor_7="${votage_division_factor_7:-1}"
 
 # ADC128 channel name
-ADC128_Channel0_name="Channel0"
+ADC128_Channel0_name="${ADC128_Channel0_name:-Channel0}"
-ADC128_Channel1_name="Channel1"
+ADC128_Channel1_name="${ADC128_Channel1_name:-Channel1}"
-ADC128_Channel2_name="Channel2"
+ADC128_Channel2_name="${ADC128_Channel2_name:-Channel2}"
-ADC128_Channel3_name="Channel3"
+ADC128_Channel3_name="${ADC128_Channel3_name:-Channel3}"
-ADC128_Channel4_name="Channel4"
+ADC128_Channel4_name="${ADC128_Channel4_name:-Channel4}"
-ADC128_Channel5_name="Channel5"
+ADC128_Channel5_name="${ADC128_Channel5_name:-Channel5}"
-ADC128_Channel6_name="Channel6"
+ADC128_Channel6_name="${ADC128_Channel6_name:-Channel6}"
-ADC128_Channel7_name="Channel7"
+ADC128_Channel7_name="${ADC128_Channel7_name:-Channel7}"
 
 # INA3221 shunt resistor(unit: mohm)
-shunt_resistor_0="2"
+shunt_resistor_0="${shunt_resistor_0:-2}"
-shunt_resistor_1="2"
+shunt_resistor_1="${shunt_resistor_1:-2}"
-shunt_resistor_2="5"
+shunt_resistor_2="${shunt_resistor_2:-5}"
 
 # INA3221 channel name
-INA3221_Channel0_name="Channel0"
+INA3221_Channel0_name="${INA3221_Channel0_name:-Channel0}"
-INA3221_Channel1_name="Channel1"
+INA3221_Channel1_name="${INA3221_Channel1_name:-Channel1}"
-INA3221_Channel2_name="Channel2"
+INA3221_Channel2_name="${INA3221_Channel2_name:-Channel2}"
 
 # EMC1413 channel name
-EMC1413_Channel0_name="Channel0"
+EMC1413_Channel0_name="${EMC1413_Channel0_name:-Channel0}"
-EMC1413_Channel1_name="Channel1"
+EMC1413_Channel1_name="${EMC1413_Channel1_name:-Channel1}"
-EMC1413_Channel2_name="Channel2"
+EMC1413_Channel2_name="${EMC1413_Channel2_name:-Channel2}"
 
 # TMP468 channel name
-TMP468_Channel0_name="Local"
+TMP468_Channel0_name="${TMP468_Channel0_name:-Local}"
-TMP468_Channel1_name="Remote1"
+TMP468_Channel1_name="${TMP468_Channel1_name:-Remote1}"
-TMP468_Channel2_name="Remote2"
+TMP468_Channel2_name="${TMP468_Channel2_name:-Remote2}"
-TMP468_Channel3_name="Remote3"
+TMP468_Channel3_name="${TMP468_Channel3_name:-Remote3}"
-TMP468_Channel4_name="Remote4"
+TMP468_Channel4_name="${TMP468_Channel4_name:-Remote4}"
-TMP468_Channel5_name="Remote5"
+TMP468_Channel5_name="${TMP468_Channel5_name:-Remote5}"
-TMP468_Channel6_name="Remote6"
+TMP468_Channel6_name="${TMP468_Channel6_name:-Remote6}"
-TMP468_Channel7_name="Remote7"
+TMP468_Channel7_name="${TMP468_Channel7_name:-Remote7}"
-TMP468_Channel8_name="Remote8"
+TMP468_Channel8_name="${TMP468_Channel8_name:-Remote8}"
 
 # TMP112 sensor name
-TMP112_Sensor_name="Temperature"
+TMP112_Sensor_name="${TMP112_Sensor_name:-Temperature}"
 
 # INA226 channel name
-INA226_Channel0_name="Channel0"
+INA226_Channel0_name="${INA226_Channel0_name:-Channel0}"
 
 # LM95241 channel name
-LM95241_Local_name="Local"
+LM95241_Local_name="${LM95241_Local_name:-Local}"
-LM95241_Remote1_name="Remote1"
+LM95241_Remote1_name="${LM95241_Remote1_name:-Remote1}"
-LM95241_Remote2_name="Remote2"
+LM95241_Remote2_name="${LM95241_Remote2_name:-Remote2}"
 # ---------------------------------------------------------
 #  Global Settings
 # ---------------------------------------------------------
@@ -161,12 +171,15 @@ pmbus_op="get"
 hex_pmbus_cmd=0xff
 hex_pmbus_size=0
 CONFIG_DIR="/tmp/nicsensor_config/"
+
+# Extension Plugin Path
+extension_dir="/extlog/nicsensor/extension"
+PMBUS_PLUGIN="${extension_dir}/pmbus_cmd_list.sh"
+STRESS_PLUGIN="${extension_dir}/stress_test.sh"
 # ---------------------------------------------------------
 #  Script Function Defination
 # ---------------------------------------------------------
 search_plugin_help(){
-    PMBUS_PLUGIN="./pmbus_cmd_list.sh"
-    STRESS_PLUGIN="./stress_test.sh"
     plugin_flag=0
     if [ -e ${PMBUS_PLUGIN} ];then
         $PMBUS_PLUGIN "help"
@@ -558,7 +571,6 @@ extension_preprocess(){
         fi
 
         # Pmbus Command need pre-process
-        PMBUS_PLUGIN="./pmbus_cmd_list.sh"
         if [ -e ${PMBUS_PLUGIN} ];then
             str_pmbus_cmd=$option_data
             hex_pmbus_cmd=`$PMBUS_PLUGIN "code" $str_pmbus_cmd`
@@ -571,18 +583,17 @@ extension_preprocess(){
             hex_pmbus_size=`$PMBUS_PLUGIN "size" $str_pmbus_cmd`
             pmbus_op=`$PMBUS_PLUGIN "operation" $str_pmbus_cmd`
         else
-            fmt_print "console" $ERROR "Can't find pmbus plugin file, please copy pmbus_cmd_list.sh to here!"
+            fmt_print "console" $ERROR "Can't find pmbus plugin file, please copy pmbus_cmd_list.sh to ${PMBUS_PLUGIN}!"
             exit 1
         fi
     fi
 
     if [ "$Param2" = "stress" ];then
-        STRESS_PLUGIN="./stress_test.sh"
         if [ -e ${STRESS_PLUGIN} ];then
             ${STRESS_PLUGIN} $Param3 $option_data
             exit 0
         else
-            fmt_print "console" $ERROR "Can't find stress plugin file, please copy stress_test.sh to here!"
+            fmt_print "console" $ERROR "Can't find stress plugin file, please copy stress_test.sh to ${STRESS_PLUGIN}!"
             exit 1
         fi
     fi
@@ -597,6 +608,10 @@ pre_exec_hook(){
     init_debuglog
     systemtool_check
 
+    if [ $PROJECT_CONFIG_STATUS -eq 0 ];then
+        fmt_print "console" $WARNING "Project config file not found, Will use default config."
+    fi
+
     if [ "$Param1" = "help" ] && [ $param_num -eq 2 ];then
         print_usage $Param2
         exit 0
@@ -1495,7 +1510,7 @@ process_fru(){
 # ---------------------------------------------------------
 #@Param1 : Operation Type, get|set
 #@Param2 : Pmbus Command, hex data
-#@Param3 : Pmbus reading size, BYTE(1)|WORD(2)|BLOCK(3)|RAW(4)
+#@Param3 : Pmbus reading/write size, BYTE(1)|WORD(2)|BLOCK(3)|RAW(4)
 transfer_pmbus_command(){
     if [ "$1" = "get" ];then
         pmbus_res=`i2ctransfer -y $i2c_bus w1@$chip_slave $2 r$3`
@@ -1503,8 +1518,15 @@ transfer_pmbus_command(){
         fmt_print "console" $INFO "$option_data ,Command Code:$2"
         fmt_print "console" $INFO "Result: $pmbus_res"
     else
-        fmt_print "console" $WARNING "Not Support Set function in this version : $SCRIPT_VERSION" 
+        # pmbus set command
-    fi
+        write_byte=$(($3+1))
+        # ./nicsensor.sh pcie1 pmbus 0x60 PAGE 0x00
+        # so, option_data2 = 0x00, is the data which will set to the power manage chip
+        exec_cmd="i2ctransfer -y $i2c_bus w${write_byte}@${chip_slave} $2 ${option_data2}"
+        pmbus_res=`$exec_cmd`
+        reset_pca9548 $i2c_bus $pca9548_slave
+        fmt_print "console" $INFO "$option_data ,Command Code:$2, Setting Data:${option_data2}"
+        fmt_print "log" $INFO "[PMBUS] Set Command : $exec_cmd"
 }
 
 # Do pmbus test if plugin avalible 
@@ -1568,9 +1590,10 @@ start_get_sensor(){
         "pmbus")
             process_pmbus
             ;;
-        "reserve")
+        # reserve function is temporarily retained for future functional expansion
-            handle_reserve
+        # "reserve")
-            ;;
+        #     handle_reserve
+        #     ;;
         *)
             fmt_print "console" $ERROR "Unsupport Sensor Type !!! - $sensor_type"
             fmt_print "console" $INFO "Support list: $Support_Sensor_List"

project.config

@@ -0,0 +1,56 @@
+# ADC128 Division factor
+votage_division_factor_0="1"
+votage_division_factor_1="1"
+votage_division_factor_2="1"
+votage_division_factor_3="0.8"
+votage_division_factor_4="0.6"
+votage_division_factor_5="0.6"
+votage_division_factor_6="0.2326"
+votage_division_factor_7="1"
+
+# ADC128 channel name
+ADC128_Channel0_name="Channel0"
+ADC128_Channel1_name="Channel1"
+ADC128_Channel2_name="Channel2"
+ADC128_Channel3_name="Channel3"
+ADC128_Channel4_name="Channel4"
+ADC128_Channel5_name="Channel5"
+ADC128_Channel6_name="Channel6"
+ADC128_Channel7_name="Channel7"
+
+# INA3221 shunt resistor(unit: mohm)
+shunt_resistor_0="2"
+shunt_resistor_1="2"
+shunt_resistor_2="5"
+
+# INA3221 channel name
+INA3221_Channel0_name="Channel0"
+INA3221_Channel1_name="Channel1"
+INA3221_Channel2_name="Channel2"
+
+# EMC1413 channel name
+EMC1413_Channel0_name="Channel0"
+EMC1413_Channel1_name="Channel1"
+EMC1413_Channel2_name="Channel2"
+
+# TMP468 channel name
+TMP468_Channel0_name="Local"
+TMP468_Channel1_name="Remote1"
+TMP468_Channel2_name="Remote2"
+TMP468_Channel3_name="Remote3"
+TMP468_Channel4_name="Remote4"
+TMP468_Channel5_name="Remote5"
+TMP468_Channel6_name="Remote6"
+TMP468_Channel7_name="Remote7"
+TMP468_Channel8_name="Remote8"
+
+# TMP112 sensor name
+TMP112_Sensor_name="Temperature"
+
+# INA226 channel name
+INA226_Channel0_name="Channel0"
+
+# LM95241 channel name
+LM95241_Local_name="Local"
+LM95241_Remote1_name="Remote1"
+LM95241_Remote2_name="Remote2"

setup.sh

@@ -0,0 +1,57 @@
+#!/bin/sh
+
+# Script Description:
+# This script is used to auto setup the nicsensor tool and its extensions.
+
+SCRIPT_VERSION="1.0.0"
+SUPPORT_TOOL_VERSION="1.11"
+
+# Default values
+source_extension_dir="./extension"
+destination_tool_dir="/extlog/nicsensor"
+destination_extension_dir="/extlog/nicsensor/extension"
+exec_path="/extlog/nicsensor/nicsensor.sh"
+
+# PRINT SCRIPT INFO
+echo "=== Nicsensor Quick Setup Script! ==="
+echo "Setup Tool Version             : $SCRIPT_VERSION"
+echo "Support nicsensor tool Version : $SUPPORT_TOOL_VERSION"
+
+# Check if the destination extension directory exists, if not, create it
+if [ ! -d "$destination_extension_dir" ]; then
+    echo "Step 0 : Create directory $destination_extension_dir"
+    mkdir -p "$destination_extension_dir"
+fi
+
+# Get script Path
+script_dir=$(pwd)
+source_extension_dir="$script_dir/extension"
+
+# check if the source extension directory exists, if not, exit
+if [ ! -d "$source_extension_dir" ]; then
+    echo "Error : Source extension directory $source_extension_dir does not exist"
+    exit 1
+fi
+
+# copy the extension files to the destination directory
+echo "Step 1 : Copy extension files to $destination_extension_dir"
+cp -rf "$source_extension_dir"/* "$destination_extension_dir"
+
+# Add execute permission for extension files
+echo "Step 2 : Add execute permission for extension files"
+chmod +x "$destination_extension_dir"/*
+
+# copy the project config to the destination directory
+echo "Step 3 : Copy project.config to $destination_tool_dir"
+cp -f "./project.config" "$destination_tool_dir"
+
+# copy the exec file to the destination directory
+echo "Step 4 : Copy nicsensor to $exec_path"
+cp -f "./nicsensor.sh" "$exec_path"
+
+# Add execute permission for exec file
+echo "Step 5 : Add execute permission for nicsensor"
+chmod +x "$exec_path"
+
+
+echo "Complete auto setup nicsensor tool and its extensions."