refactor(master : nicsensor)重新整理变量结构

nicsensor.sh

@@ -1,9 +1,8 @@
 #!/bin/sh
-
+SCRIPT_VERSION="1.7.3"
 # ---------------------------------------------------------
 # Project Feature Varible (Change as need)
 # ---------------------------------------------------------
-
 # ADC128 Division factor
 votage_division_factor_0="1"
 votage_division_factor_1="1"
@@ -55,30 +54,35 @@ TMP112_Sensor_name="Temperature"
 
 # fru basic offset
 fru_offset="0x00 0x00"
-
+# ---------------------------------------------------------
+#  Global Settings
+# ---------------------------------------------------------
 Support_Sensor_List="emc1413, adc128, ina3221, tmp468, tmp112"
 Support_Server_List="5280m7, 5468m7, 5688m7, donghu, yichun, qiandaohu"
 # Which server will use this script
 server_type="auto"
 
+# DISABLE_DETECT=0 : do i2cdetect when i2c status changed
+#               =1 : don't do i2cdetect when i2c status changed
+DISABLE_DETECT=1
+
+# DEBUG MODE=0 : Disable debug mode
+#           =1 : Enable debug mode
+DEBUG_MODE=0
+i2c_bus=12
 # ---------------------------------------------------------
-#  Common Varible (Don't Change)
+#  Global Varible (Don't Change)
 # ---------------------------------------------------------
 # Input Param
 nic_slot=$1
 sensor_type=$2
-
-# Introduction of chip_slave
-# 1.chip i2c slave address(7bit)
 chip_slave=$3
 option_data=$4
 option_data2=$5
-
 param_num=$#
 
-# CHIP REGISTER
+# REGISTER Table
 REG_pca9641_controll="0x01"
-
 REG_adc128_config="0x00"
 REG_adc128_advance="0x0b"
 REG_adc128_status="0x0c"
@@ -90,64 +94,45 @@ REG_adc128_ch4="0x24"
 REG_adc128_ch5="0x25"
 REG_adc128_ch6="0x26"
 REG_adc128_ch7="0x27"
-
 REG_emc1413_TD1_H="0x00"
 REG_emc1413_TD1_L="0x29"
 REG_emc1413_TD2_H="0x01"
 REG_emc1413_TD2_L="0x10"
 REG_emc1413_TD3_H="0x23"
 REG_emc1413_TD3_L="0x24"
-
 REG_ina3221_ch1="0x01"
 REG_ina3221_ch2="0x03"
 REG_ina3221_ch3="0x05"
 REG_ina3221_bus1="0x02"
 REG_ina3221_bus2="0x04"
 REG_ina3221_bus3="0x06"
-
 REG_tmp112="0x00"
 REG_tmp468="0x80"
-# ---------------------------------------------------------
-#  Global Varible (Don't Change)
-# ---------------------------------------------------------
-# DISABLE_DETECT=0 : do i2cdetect when i2c status changed
-#               =1 : don't do i2cdetect when i2c status changed
-DISABLE_DETECT=1
 
-# DEBUG MODE=0 : Disable debug mode
-#           =1 : Enable debug mode
-DEBUG_MODE=0
-
-i2c_bus=12
+# Global Param
 pca9641_slave=0x41
 pca9548_channel=0x04
 pca9548_slave=0x72
-
 is_have_pca9641=1
-
-log="/tmp/nicsensor_debug.log"
 INA3221_SHUNT_VOLT=0
 INA3221_BUS_VOLT=1
 INA3221_POWER=2
-
-INFO="Info"
-WARNING="Warning"
-ERROR="Error"
-
 ina3221_ch0_volt="0"
 ina3221_ch1_volt="0"
 ina3221_ch2_volt="0"
 ina3221_ch0_current="0"
 ina3221_ch1_current="0"
 ina3221_ch2_current="0"
-SCRIPT_VERSION="1.7.3"
-
 fru_file_name=$option_data2
 fru_write_size=0
 fru_write_data=""
 nic_type=""
 slot_number=""
 res_tmp468=""
+INFO="Info"
+WARNING="Warning"
+ERROR="Error"
+log="/tmp/nicsensor_debug.log"
 
 # ---------------------------------------------------------
 #  Script Function Defination