From b5a0cac6e2c0274b9fb93e66c7e156067b830b60 Mon Sep 17 00:00:00 2001 From: leimingsheng Date: Mon, 18 Aug 2025 14:20:10 +0800 Subject: [PATCH] =?UTF-8?q?feat(master=20:=20nicsensor)=20=E6=96=B0?= =?UTF-8?q?=E5=A2=9E=E8=84=9A=E6=9C=ACnicsensor=5Fs.sh?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- nicsensor_s.sh | 1212 ++++++++++++++++++++++++++++++++++++++++++++++++ readme.md | 4 + 2 files changed, 1216 insertions(+) create mode 100644 nicsensor_s.sh diff --git a/nicsensor_s.sh b/nicsensor_s.sh new file mode 100644 index 0000000..aebb5eb --- /dev/null +++ b/nicsensor_s.sh @@ -0,0 +1,1212 @@ +#!/bin/sh +SCRIPT_VERSION="1.8s" +# --------------------------------------------------------- +# Project Feature Varible (Change as need) +# --------------------------------------------------------- +# ADC128 Division factor +votage_division_factor_0="1" +votage_division_factor_1="1" +votage_division_factor_2="1" +votage_division_factor_3="0.8" +votage_division_factor_4="0.6" +votage_division_factor_5="0.6" +votage_division_factor_6="0.2326" +votage_division_factor_7="1" + +# ADC128 channel name +ADC128_Channel0_name="Channel0" +ADC128_Channel1_name="Channel1" +ADC128_Channel2_name="Channel2" +ADC128_Channel3_name="Channel3" +ADC128_Channel4_name="Channel4" +ADC128_Channel5_name="Channel5" +ADC128_Channel6_name="Channel6" +ADC128_Channel7_name="Channel7" + +# INA3221 shunt resistor(unit: mohm) +shunt_resistor_0="2" +shunt_resistor_1="2" +shunt_resistor_2="5" + +# INA3221 channel name +INA3221_Channel0_name="Channel0" +INA3221_Channel1_name="Channel1" +INA3221_Channel2_name="Channel2" + +# EMC1413 channel name +EMC1413_Channel0_name="Channel0" +EMC1413_Channel1_name="Channel1" +EMC1413_Channel2_name="Channel2" + +# TMP468 channel name +TMP468_Channel0_name="Local" +TMP468_Channel1_name="Remote1" +TMP468_Channel2_name="Remote2" +TMP468_Channel3_name="Remote3" +TMP468_Channel4_name="Remote4" +TMP468_Channel5_name="Remote5" +TMP468_Channel6_name="Remote6" +TMP468_Channel7_name="Remote7" +TMP468_Channel8_name="Remote8" + +# TMP112 sensor name +TMP112_Sensor_name="Temperature" + +# fru basic offset +fru_offset="0x00 0x00" +# --------------------------------------------------------- +# Global Settings +# --------------------------------------------------------- +Support_Sensor_List="emc1413, adc128, ina3221, tmp468, tmp112" +Support_Server_List="5280m7, 5468m7, 5688m7, donghu, yichun, qiandaohu" +# Which server will use this script +server_type="5280m7" +i2c_bus=12 +# --------------------------------------------------------- +# Global Varible (Don't Change) +# --------------------------------------------------------- +# Input Param +nic_slot=$1 +sensor_type=$2 +chip_slave=$3 +option_data=$4 +option_data2=$5 +param_num=$# + +# REGISTER Table +REG_pca9641_controll="0x01" +REG_adc128_config="0x00" +REG_adc128_advance="0x0b" +REG_adc128_status="0x0c" +REG_adc128_ch0="0x20" +REG_adc128_ch1="0x21" +REG_adc128_ch2="0x22" +REG_adc128_ch3="0x23" +REG_adc128_ch4="0x24" +REG_adc128_ch5="0x25" +REG_adc128_ch6="0x26" +REG_adc128_ch7="0x27" +REG_emc1413_TD1_H="0x00" +REG_emc1413_TD1_L="0x29" +REG_emc1413_TD2_H="0x01" +REG_emc1413_TD2_L="0x10" +REG_emc1413_TD3_H="0x23" +REG_emc1413_TD3_L="0x24" +REG_ina3221_ch1="0x01" +REG_ina3221_ch2="0x03" +REG_ina3221_ch3="0x05" +REG_ina3221_bus1="0x02" +REG_ina3221_bus2="0x04" +REG_ina3221_bus3="0x06" +REG_tmp112="0x00" +REG_tmp468="0x80" + +# Global Param +pca9641_slave=0x41 +pca9548_channel=0x04 +pca9548_slave=0x72 +is_have_pca9641=1 +INA3221_SHUNT_VOLT=0 +INA3221_BUS_VOLT=1 +INA3221_POWER=2 +ina3221_ch0_volt="0" +ina3221_ch1_volt="0" +ina3221_ch2_volt="0" +ina3221_ch0_current="0" +ina3221_ch1_current="0" +ina3221_ch2_current="0" +fru_file_name=$option_data2 +fru_write_size=0 +fru_write_data="" +nic_type="" +slot_number="" +res_tmp468="" +# --------------------------------------------------------- +# Script Function Defination +# --------------------------------------------------------- +print_usage(){ + echo "" + echo "================>>> nicsensor script usage <<<==================" + echo " Function 1 - Read Sensor Value" + echo " 1) Command Format : ./nicsensor.sh [slot] [sensor tpye] [slave]" + echo " 2) Option Detail" + echo " - [slot] : 0 1 2 3 4 5 ..." + echo " - [sensor type] : $Support_Sensor_List" + echo " - [slave] : chip slave address , please provide 7 bit address" + echo " 3) E.G. : ./nicsensor.sh 1 adc128 0x1f" + echo " ./nicsensor.sh pcie1 ina3221 0x42" + echo " ./nicsensor.sh ocp0 emc1413 0x4c" + echo "" + echo " Function 2 - Detect I2C for each slot" + echo " 1) Command Format : ./nicsensor.sh detect [pcie/ocp]" + echo " 2) E.G. : ./nicsensor.sh detect pcie" + echo " ./nicsensor.sh detect ocp [some server don't support]" + echo " 3) Note : This function now only support on server:" + echo " $Support_Server_List" + echo "" + echo " Function 3 - Send an i2c command to chip on Nic" + echo " 1) Command Format : ./nicsensor.sh [slot] chip [slave] [command]" + echo " 2) Option Detail" + echo " - [slot] : 0 1 2 3 4 5 ..." + echo " - [slave] : chip slave address , please provide 7 bit address" + echo " - [command] : The i2c command which will set to the chip" + echo " 3) E.G. : ./nicsensor.sh pcie1 chip 0x10 'i2ctransfer -y 12 w1@0x10 0x00 r2'" + echo "" + echo " Function 4 - FRU Read and Wirte" + echo " 1) Command Format : ./nicsensor.sh [slot] fru [slave] [option] [frudata]" + echo " 2) Option Detail" + echo " - [slot] : 0 1 2 3 4 5 ..." + echo " - [slave] : chip slave address , please provide 7 bit address" + echo " - [option] : read/write, default to read" + echo " - [frudata] : fru bin file which will write to eeprom, only for write option" + echo " 3) E.G. : ./nicsensor.sh pcie0 fru 0x57" + echo " : ./nicsensor.sh pcie0 fru 0x57 read" + echo " : ./nicsensor.sh pcie0 fru 0x57 write /tmp/fru.bin" + echo "" +} + +fmt_print(){ + if [ "$1" = "console" ];then + echo ">>> [$2] $3" + else + echo "[$2] $3" + fi +} + +do_i2c_detect(){ + if [ $nic_type = "ocp" ];then + fmt_print "console" $INFO "OCP slot $5 : bus$1 9548channel$4" + else + fmt_print "console" $INFO "PCIe slot $5 : bus$1 9548channel$4" + fi + i2ctransfer -y $1 w1@$2 $3 + i2cdetect -y $1 +} + +reset_pca9548(){ + i2ctransfer -y $1 w1@$2 0x00 +} + +# Get nic type and slot number +parse_nic_slot(){ + fullname=0 + case $nic_slot in + ocp*) + nic_type="ocp" + ;; + pcie*) + nic_type="pcie" + fullname=1 + ;; + *) + nic_type="pcie" + fullname=0; + ;; + esac + + if [ $nic_type = "ocp" ];then + slot_number=$(echo $nic_slot | cut -b 4-) + else + if [ $fullname -eq 1 ];then + slot_number=$(echo $nic_slot | cut -b 5-) + else + slot_number=$nic_slot + fi + fi +} + +get_pca9641_control(){ + # Request 9641 lock + res_lock=`i2ctransfer -y $i2c_bus w2@$pca9641_slave $REG_pca9641_controll 0x81 r1` + + # Build 9641 Connection + res_build=`i2ctransfer -y $i2c_bus w2@$pca9641_slave $REG_pca9641_controll 0x85 r1` + + if [ "$res_build" != "0x87" ];then + fmt_print "console" $ERROR "Cannot establish connection with pca9641 !!!" + exit 1 + fi +} + +switch_pca9548_channel(){ + # set 9548 channel + res_setchannel=`i2ctransfer -y $i2c_bus w1@$pca9548_slave $pca9548_channel` +} + +# pre execute hook function +pre_exec_hook(){ + # is param legel? + if [ "$Param2" = "chip" ];then + if [ $param_num -le 3 ];then + fmt_print "console" $ERROR "Command Format illegal" + echo "Command Format : ./nicsensor.sh [slot] chip [slave] [i2c_command]" + exit 1 + fi + fi + + # if the action is fru write, need pre-process fru data + if [ "$Param2" = "fru" ];then + if [ "$option_data" = "write" ];then + + # is option_data(fru file name) valid? + if [ "$option_data2" = "" ];then + fmt_print "console" $ERROR "Please provide fru file name" + echo "Command Format : ./nicsensor.sh [slot] fru [slave] write [fru_file]" + exit 1 + fi + + parse_fru_write_data + fi + fi +} + +# --------------------------------------------------------- +# Set i2c configuration +# --------------------------------------------------------- +set_configuration_5280m7(){ + if [ $nic_type = "ocp" ];then + is_have_pca9641=0 + pca9548_slave="0x70" + i2c_bus=3 + + if [ $slot_number -eq 0 ];then + pca9548_channel="0x01" + elif [ $slot_number -eq 1 ];then + pca9548_channel="0x02" + elif [ $slot_number -eq 2 ];then + pca9548_channel="0x04" + else + fmt_print "console" $WARNING "Unspecified card slot!" + fi + else + is_have_pca9641=1 + if [ $slot_number -le 2 ];then + pca9641_slave="0x41" + pca9548_slave="0x72" + i2c_bus=12 + else + pca9641_slave="0x42" + pca9548_slave="0x72" + i2c_bus=13 + fi + + if [ $slot_number -eq 0 ];then + pca9548_channel="0x02" + elif [ $slot_number -eq 1 ];then + pca9548_channel="0x04" + elif [ $slot_number -eq 2 ];then + pca9548_channel="0x08" + elif [ $slot_number -eq 3 ];then + pca9548_channel="0x02" + elif [ $slot_number -eq 4 ];then + pca9548_channel="0x04" + elif [ $slot_number -eq 5 ];then + pca9548_channel="0x08" + else + fmt_print "console" $WARNING "Unspecified card slot!" + fi + fi +} + +set_configuration_5468m7(){ + if [ $nic_type = "ocp" ];then + fmt_print "console" $ERROR "Unsupport OCP Nic on $server_type" + fmt_print "console" $INFO "Please check if script has update version" + exit 1 + else + is_have_pca9641=1 + if [ $slot_number -le 4 ];then + pca9641_slave="0x31" + pca9548_slave="0x70" + i2c_bus=13 + else + pca9641_slave="0x42" + pca9548_slave="0x71" + i2c_bus=14 + fi + + if [ $slot_number -eq 0 ];then + pca9548_channel="0x01" + elif [ $slot_number -eq 1 ];then + pca9548_channel="0x02" + elif [ $slot_number -eq 2 ];then + pca9548_channel="0x04" + elif [ $slot_number -eq 3 ];then + pca9548_channel="0x08" + elif [ $slot_number -eq 4 ];then + pca9548_channel="0x10" + elif [ $slot_number -eq 5 ];then + pca9548_channel="0x01" + elif [ $slot_number -eq 6 ];then + pca9548_channel="0x02" + elif [ $slot_number -eq 7 ];then + pca9548_channel="0x04" + elif [ $slot_number -eq 8 ];then + pca9548_channel="0x08" + elif [ $slot_number -eq 9 ];then + pca9548_channel="0x10" + elif [ $slot_number -eq 10 ];then + pca9548_channel="0x20" + else + fmt_print "console" $WARNING "Unspecified card slot!" + fi + fi +} + +set_configuration_donghu(){ + if [ $nic_type = "ocp" ];then + fmt_print "console" $ERROR "Unsupport OCP Nic on $server_type" + fmt_print "console" $INFO "Please check if script has update version" + exit 1 + else + is_have_pca9641=0 + i2c_bus=3 + pca9548_slave="0x70" + if [ $slot_number -eq 0 ];then + pca9548_channel="0x80" + elif [ $slot_number -eq 1 ];then + pca9548_channel="0x40" + elif [ $slot_number -eq 2 ];then + pca9548_channel="0x20" + elif [ $slot_number -eq 3 ];then + pca9548_channel="0x10" + elif [ $slot_number -eq 4 ];then + pca9548_channel="0x08" + elif [ $slot_number -eq 5 ];then + pca9548_channel="0x04" + elif [ $slot_number -eq 6 ];then + pca9548_channel="0x02" + elif [ $slot_number -eq 7 ];then + pca9548_channel="0x01" + else + fmt_print "console" $WARNING "Unspecified card slot!" + fi + fi +} + +set_configuration_yichun(){ + if [ $nic_type = "ocp" ];then + fmt_print "console" $ERROR "Unsupport OCP Nic on $server_type" + fmt_print "console" $INFO "Please check if script has update version" + exit 1 + else + is_have_pca9641=0 + pca9548_slave="0x74" + if [ $slot_number -eq 0 ];then + i2c_bus=12 + pca9548_channel="0x02" + elif [ $slot_number -eq 1 ];then + i2c_bus=13 + pca9548_channel="0x02" + elif [ $slot_number -eq 2 ];then + i2c_bus=14 + pca9548_channel="0x02" + else + fmt_print "console" $WARNING "Unspecified card slot!" + fi + fi +} + +set_configuration_qiandaohu(){ + if [ $nic_type = "ocp" ];then + fmt_print "console" $ERROR "Unsupport OCP Nic on $server_type" + fmt_print "console" $INFO "Please check if script has update version" + exit 1 + else + is_have_pca9641=0 + if [ $slot_number -le 7 ];then + i2c_bus=3 + pca9548_slave=0x70 + else + i2c_bus=6 + pca9548_slave=0x71 + fi + if [ $slot_number -eq 0 ];then + pca9548_channel="0x08" + elif [ $slot_number -eq 1 ];then + pca9548_channel="0x04" + elif [ $slot_number -eq 2 ];then + pca9548_channel="0x01" + elif [ $slot_number -eq 3 ];then + pca9548_channel="0x02" + elif [ $slot_number -eq 4 ];then + pca9548_channel="0x80" + elif [ $slot_number -eq 5 ];then + pca9548_channel="0x40" + elif [ $slot_number -eq 6 ];then + pca9548_channel="0x10" + elif [ $slot_number -eq 7 ];then + pca9548_channel="0x20" + elif [ $slot_number -eq 8 ];then + pca9548_channel="0x08" + elif [ $slot_number -eq 9 ];then + pca9548_channel="0x04" + elif [ $slot_number -eq 10 ];then + pca9548_channel="0x01" + elif [ $slot_number -eq 11 ];then + pca9548_channel="0x02" + else + fmt_print "console" $WARNING "Unspecified card slot!" + fi + fi +} + +set_configuration_5688m7(){ + if [ $nic_type = "ocp" ];then + fmt_print "console" $ERROR "Unsupport OCP Nic on $server_type" + fmt_print "console" $INFO "Please check if script has update version" + exit 1 + else + is_have_pca9641=1 + pca9641_slave="0x31" + i2c_bus=12 + if [ $slot_number -le 3 ];then + pca9548_slave=0x71 + else + pca9548_slave=0x72 + fi + if [ $slot_number -eq 0 ];then + pca9548_channel="0x01" + elif [ $slot_number -eq 1 ];then + pca9548_channel="0x02" + elif [ $slot_number -eq 2 ];then + pca9548_channel="0x04" + elif [ $slot_number -eq 3 ];then + pca9548_channel="0x08" + elif [ $slot_number -eq 4 ];then + pca9548_channel="0x01" + elif [ $slot_number -eq 5 ];then + pca9548_channel="0x02" + elif [ $slot_number -eq 6 ];then + pca9548_channel="0x04" + elif [ $slot_number -eq 7 ];then + pca9548_channel="0x08" + else + fmt_print "console" $WARNING "Unspecified card slot!" + fi + fi +} + +# Base on the server type, set i2c conf +set_configuration(){ + parse_nic_slot + + case $server_type in + "5280m7") + # Support PCIe and OCP configuration + set_configuration_5280m7 + ;; + "5468m7") + set_configuration_5468m7 + ;; + "donghu") + set_configuration_donghu + ;; + "yichun") + set_configuration_yichun + ;; + "qiandaohu") + set_configuration_qiandaohu + ;; + "5688m7") + set_configuration_5688m7 + ;; + *) + fmt_print "console" $ERROR "Error: Unsupport Server Type !!! - $server_type" + fmt_print "console" $INFO "Support list: $Support_Server_List" + exit 1 + ;; + esac +} + +# --------------------------------------------------------- +# Chip EMC1413 +# --------------------------------------------------------- +# process sensor data then print to console +# @Param1 emc1413 data high 8bit +# @Param2 emc1413 data low 8bit +# @Param3 customization channel name +convert_emc1413_data(){ + if [ "$3" = "disable" ];then + return + fi + # remove data prefix '0x' + hex_value1=$(echo "$1" | awk '{sub(/^0x/,""); print}') + hex_value2=$(echo "$2" | awk '{sub(/^0x/,""); print}') + upper_hex_value1=$(echo "$hex_value1" | awk '{ + for(i=1; i<=length($0); i++){ + if(tolower(substr($0,i,1)) ~ /^[a-f]$/) + printf toupper(substr($0,i,1)); + else + printf substr($0,i,1); + } + print "" + }') + upper_hex_value2=$(echo "$hex_value2" | awk '{ + for(i=1; i<=length($0); i++){ + if(tolower(substr($0,i,1)) ~ /^[a-f]$/) + printf toupper(substr($0,i,1)); + else + printf substr($0,i,1); + } + print "" + }') + dec_value1=$(echo "ibase=16; $upper_hex_value1" | bc) + dec_value2=$(echo "ibase=16; $upper_hex_value2" | bc) + temp=$(echo "scale=4; $dec_value1 + ($dec_value2 / 32 * 0.125 )" | bc) + format_temp=$(echo "$temp" | awk '{ if ($0 ~ /^\./) print "0" $0; else print $0 }') + echo "$3 : $format_temp C" +} + +# Get the sensor data, then parse raw data +read_emc1413_channel_value(){ + res_td1_h=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_emc1413_TD1_H r1` + res_td1_l=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_emc1413_TD1_L r1` + res_td2_h=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_emc1413_TD2_H r1` + res_td2_l=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_emc1413_TD2_L r1` + res_td3_h=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_emc1413_TD3_H r1` + res_td3_l=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_emc1413_TD3_L r1` + reset_pca9548 $i2c_bus $pca9548_slave + + echo ">>> The emc1413 value is:" + convert_emc1413_data $res_td1_h $res_td1_l "$EMC1413_Channel0_name" + convert_emc1413_data $res_td2_h $res_td2_l "$EMC1413_Channel1_name" + convert_emc1413_data $res_td3_h $res_td3_l "$EMC1413_Channel2_name" +} + +process_emc1413(){ + read_emc1413_channel_value +} + +# --------------------------------------------------------- +# Chip ADC128 +# --------------------------------------------------------- +# adc128 chip init if need +check_adc128_init(){ + # Get Reg 0x00 status + res_adc128_status=`i2cget -y $i2c_bus $chip_slave $REG_adc128_config` + + # if stauts is not 0x01 (Start Monitor) ,then do init + if [ "$res_adc128_status" != "0x01" ];then + # Init ADC128 work as mode 1 (0x02) + res_adc128_advance=`i2ctransfer -y $i2c_bus w2@$chip_slave $REG_adc128_advance 0x02` + # Set ADC128 on start (0x01) + res_adc128_setstart=`i2ctransfer -y $i2c_bus w2@$chip_slave $REG_adc128_config 0x01 r1` + fi +} + +# process sensor data then print to console +# @Param 1 adc128 data high 8bit +# @Param 2 adc128 data low 8bit +# @Param 3 customization channel name +# @Param 4 division factor +convert_adc128_data(){ + if [ "$3" = "disable" ];then + return + fi + # remove data prefix '0x' + hex_value1=$(echo "$1" | awk '{sub(/^0x/,""); print}') + hex_value2=$(echo "$2" | awk '{sub(/^0x/,""); print}') + merge_value="${hex_value1}${hex_value2}" + upper_hex_value=$(echo "$merge_value" | awk '{ + for(i=1; i<=length($0); i++){ + if(tolower(substr($0,i,1)) ~ /^[a-f]$/) + printf toupper(substr($0,i,1)); + else + printf substr($0,i,1); + } + print "" + }') + dec_val=$(echo "ibase=16; $upper_hex_value" | bc) + volt=$(echo "scale=4; $dec_val / 16 / 4096 * 2.65 / $4" | bc) + format_volt=$(echo "$volt" | awk '{ if ($0 ~ /^\./) print "0" $0; else print $0 }') + echo "$3 : $format_volt V" +} + +# Get the sensor data, then parse raw data +read_adc128_channel_value(){ + res_ch0=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_adc128_ch0 r2` + res_ch1=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_adc128_ch1 r2` + res_ch2=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_adc128_ch2 r2` + res_ch3=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_adc128_ch3 r2` + res_ch4=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_adc128_ch4 r2` + res_ch5=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_adc128_ch5 r2` + res_ch6=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_adc128_ch6 r2` + res_ch7=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_adc128_ch7 r2` + reset_pca9548 $i2c_bus $pca9548_slave + echo ">>> The ADC128 value is :" + convert_adc128_data $res_ch0 "$ADC128_Channel0_name" $votage_division_factor_0 + convert_adc128_data $res_ch1 "$ADC128_Channel1_name" $votage_division_factor_1 + convert_adc128_data $res_ch2 "$ADC128_Channel2_name" $votage_division_factor_2 + convert_adc128_data $res_ch3 "$ADC128_Channel3_name" $votage_division_factor_3 + convert_adc128_data $res_ch4 "$ADC128_Channel4_name" $votage_division_factor_4 + convert_adc128_data $res_ch5 "$ADC128_Channel5_name" $votage_division_factor_5 + convert_adc128_data $res_ch6 "$ADC128_Channel6_name" $votage_division_factor_6 + convert_adc128_data $res_ch7 "$ADC128_Channel7_name" $votage_division_factor_7 +} + +process_adc128(){ + check_adc128_init + read_adc128_channel_value +} + +# --------------------------------------------------------- +# Chip INA3221 +# --------------------------------------------------------- +# process sensor data then print to console +# @Param1 ina3221 data high 8bit +# @Param2 ina3221 data high 8bit +# @Param3 channel number +# @Param4 mode select 0 - shunt volt +# 1 - bus volt +# @Param5 shunt resistor(only used in mode shunt volt) +# @Param6 customization channel name +convert_ina3221_data(){ + if [ "$6" = "disable" ];then + return + fi + + hex_value1=$(echo "$1" | awk '{sub(/^0x/,""); print}') + hex_value2=$(echo "$2" | awk '{sub(/^0x/,""); print}') + merge_value="${hex_value1}${hex_value2}" + upper_hex_value=$(echo "$merge_value" | awk '{ + for(i=1; i<=length($0); i++){ + if(tolower(substr($0,i,1)) ~ /^[a-f]$/) + printf toupper(substr($0,i,1)); + else + printf substr($0,i,1); + } + print "" + }') + dec_val=$(echo "ibase=16; $upper_hex_value" | bc) + + if [ $4 -eq $INA3221_BUS_VOLT ];then + volt=$(echo "scale=4; $dec_val / 8 * 40 / 10000 * 2" | bc) + format_volt=$(echo "$volt" | awk '{ if ($0 ~ /^\./) print "0" $0; else print $0 }') + echo "$6 : $format_volt V" + if [ $3 -eq 0 ];then + ina3221_ch0_volt=$format_volt + elif [ $3 -eq 1 ];then + ina3221_ch1_volt=$format_volt + else + ina3221_ch2_volt=$format_volt + fi + + elif [ $4 -eq $INA3221_SHUNT_VOLT ];then + current_mv=$(echo "scale=4; $dec_val / 8 * 40 / 1000" | bc) + current=$(echo "scale=4; $current_mv / $5" | bc) + format_current=$(echo "$current" | awk '{ if ($0 ~ /^\./) print "0" $0; else print $0 }') + format_current_mv=$(echo "$current_mv" | awk '{ if ($0 ~ /^\./) print "0" $0; else print $0 }') + echo "$6 : $format_current A, shunt volt: $format_current_mv mV, shunt resistor: $5 mOhm" + if [ $3 -eq 0 ];then + ina3221_ch0_current=$format_current + elif [ $3 -eq 1 ];then + ina3221_ch1_current=$format_current + else + ina3221_ch2_current=$format_current + fi + + elif [ $4 -eq $INA3221_POWER ];then + power_ch0=$(echo "scale=4; $ina3221_ch0_volt * $ina3221_ch0_current" | bc) + power_ch1=$(echo "scale=4; $ina3221_ch1_volt * $ina3221_ch1_current" | bc) + power_ch2=$(echo "scale=4; $ina3221_ch2_volt * $ina3221_ch2_current" | bc) + format_power_ch0=$(echo "$power_ch0" | awk '{ if ($0 ~ /^\./) print "0" $0; else print $0 }') + format_power_ch1=$(echo "$power_ch1" | awk '{ if ($0 ~ /^\./) print "0" $0; else print $0 }') + format_power_ch2=$(echo "$power_ch2" | awk '{ if ($0 ~ /^\./) print "0" $0; else print $0 }') + total_power=$(echo "scale=4; $power_ch0 + $power_ch1 + $power_ch2" | bc) + echo "$INA3221_Channel0_name : $format_power_ch0 W" + echo "$INA3221_Channel1_name : $format_power_ch1 W" + echo "$INA3221_Channel2_name : $format_power_ch2 W" + echo "total power: $total_power W" + fi +} + +# Get the sensor data, then parse raw data +read_ina3221_channel_value(){ + res_ch0=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_ina3221_ch1 r2` + res_ch1=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_ina3221_ch2 r2` + res_ch2=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_ina3221_ch3 r2` + res_bus0=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_ina3221_bus1 r2` + res_bus1=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_ina3221_bus2 r2` + res_bus2=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_ina3221_bus3 r2` + reset_pca9548 $i2c_bus $pca9548_slave + + # start parse raw data + echo ">>> The INA3221 shunt value is :" + convert_ina3221_data $res_ch0 0 $INA3221_SHUNT_VOLT $shunt_resistor_0 "$INA3221_Channel0_name" + convert_ina3221_data $res_ch1 1 $INA3221_SHUNT_VOLT $shunt_resistor_1 "$INA3221_Channel1_name" + convert_ina3221_data $res_ch2 2 $INA3221_SHUNT_VOLT $shunt_resistor_2 "$INA3221_Channel2_name" + echo ">>> The INA3221 bus value is :" + convert_ina3221_data $res_bus0 0 $INA3221_BUS_VOLT null "$INA3221_Channel0_name" + convert_ina3221_data $res_bus1 1 $INA3221_BUS_VOLT null "$INA3221_Channel1_name" + convert_ina3221_data $res_bus2 2 $INA3221_BUS_VOLT null "$INA3221_Channel2_name" + echo ">>> The INA3221 bus power is :" + convert_ina3221_data 0 0 0 $INA3221_POWER +} + +process_ina3221(){ + read_ina3221_channel_value +} +# --------------------------------------------------------- +# Chip TMP468 +# --------------------------------------------------------- +# @Param1 tmp468 data high 8bit +# @Param2 tmp468 data high 8bit +# @Param3 customization channel name +convert_tmp468_data(){ + if [ "$3" = "disable" ];then + return + fi + hex_value1=$(echo "$1" | awk '{sub(/^0x/,""); print}') + hex_value2=$(echo "$2" | awk '{sub(/^0x/,""); print}') + merge_value="${hex_value1}${hex_value2}" + upper_hex_value=$(echo "$merge_value" | awk '{ + for(i=1; i<=length($0); i++){ + if(tolower(substr($0,i,1)) ~ /^[a-f]$/) + printf toupper(substr($0,i,1)); + else + printf substr($0,i,1); + } + print "" + }') + dec_val=$(echo "ibase=16; $upper_hex_value" | bc) + + temp=$(echo "scale=4; $dec_val / 8 * 0.0625" | bc) + echo "$3 : $temp " +} + +read_tmp468_value(){ + res_tmp468=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_tmp468 r18` + reset_pca9548 $i2c_bus $pca9548_slave + + tmp468_res1_h=`echo $res_tmp468 | awk '{print $1}'` + tmp468_res1_l=`echo $res_tmp468 | awk '{print $2}'` + tmp468_res2_h=`echo $res_tmp468 | awk '{print $3}'` + tmp468_res2_l=`echo $res_tmp468 | awk '{print $4}'` + tmp468_res3_h=`echo $res_tmp468 | awk '{print $5}'` + tmp468_res3_l=`echo $res_tmp468 | awk '{print $6}'` + tmp468_res4_h=`echo $res_tmp468 | awk '{print $7}'` + tmp468_res4_l=`echo $res_tmp468 | awk '{print $8}'` + tmp468_res5_h=`echo $res_tmp468 | awk '{print $9}'` + tmp468_res5_l=`echo $res_tmp468 | awk '{print $10}'` + tmp468_res6_h=`echo $res_tmp468 | awk '{print $11}'` + tmp468_res6_l=`echo $res_tmp468 | awk '{print $12}'` + tmp468_res7_h=`echo $res_tmp468 | awk '{print $13}'` + tmp468_res7_l=`echo $res_tmp468 | awk '{print $14}'` + tmp468_res8_h=`echo $res_tmp468 | awk '{print $15}'` + tmp468_res8_l=`echo $res_tmp468 | awk '{print $16}'` + tmp468_res9_h=`echo $res_tmp468 | awk '{print $17}'` + tmp468_res9_l=`echo $res_tmp468 | awk '{print $18}'` + + fmt_print "console" $INFO "Tmp468 read result:" + convert_tmp468_data $tmp468_res1_h $tmp468_res1_l "$TMP468_Channel0_name" + convert_tmp468_data $tmp468_res2_h $tmp468_res2_l "$TMP468_Channel1_name" + convert_tmp468_data $tmp468_res3_h $tmp468_res3_l "$TMP468_Channel2_name" + convert_tmp468_data $tmp468_res4_h $tmp468_res4_l "$TMP468_Channel3_name" + convert_tmp468_data $tmp468_res5_h $tmp468_res5_l "$TMP468_Channel4_name" + convert_tmp468_data $tmp468_res6_h $tmp468_res6_l "$TMP468_Channel5_name" + convert_tmp468_data $tmp468_res7_h $tmp468_res7_l "$TMP468_Channel6_name" + convert_tmp468_data $tmp468_res8_h $tmp468_res8_l "$TMP468_Channel7_name" + convert_tmp468_data $tmp468_res9_h $tmp468_res9_l "$TMP468_Channel8_name" +} + +process_tmp468(){ + read_tmp468_value +} + +# --------------------------------------------------------- +# Chip TMP112 +# --------------------------------------------------------- +# @Param1 tmp112 data high 8bit +# @Param2 tmp112 data low 8bit +# @Param3 customization sensor name +convert_tmp112_data(){ + if [ "$3" = "disable" ];then + return + fi + + hex_value1=$(echo "$1" | awk '{sub(/^0x/,""); print}') + hex_value2=$(echo "$2" | awk '{sub(/^0x/,""); print}') + merge_value="${hex_value1}${hex_value2}" + upper_hex_value=$(echo "$merge_value" | awk '{ + for(i=1; i<=length($0); i++){ + if(tolower(substr($0,i,1)) ~ /^[a-f]$/) + printf toupper(substr($0,i,1)); + else + printf substr($0,i,1); + } + print "" + }') + dec_val=$(echo "ibase=16; $upper_hex_value" | bc) + + binary_number=$(echo "ibase=16;obase=2;$upper_hex_value" | bc) + bin_length=$(echo $binary_number | awk '{print length($0)}') + last_digit=$(echo $binary_number | cut -c $bin_length) + if [ $last_digit -eq 0 ];then + temp=$(echo "scale=4; $dec_val / 16 * 0.0625" | bc) + elif [ $last_digit -eq 1 ];then + temp=$(echo "scale=4; ( $dec_val - 1 ) / 8 * 0.0625" | bc) + fi + + echo "$3 : $temp" +} + +read_tmp112_value(){ + res_tmp112=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_tmp112 r2` + reset_pca9548 $i2c_bus $pca9548_slave + + fmt_print "console" $INFO "Tmp112 read result:" + convert_tmp112_data $res_tmp112 "$TMP112_Sensor_name" +} + +process_tmp112(){ + read_tmp112_value +} +# --------------------------------------------------------- +# CHIP +# --------------------------------------------------------- +# do a customization command +write_read_chip(){ + cmd_wr=$option_data + res_wr=`$cmd_wr` + reset_pca9548 $i2c_bus $pca9548_slave + + fmt_print "console" $INFO "Chip Command: $cmd_wr" + fmt_print "console" $INFO "The Result : $res_wr" +} + +process_chip(){ + write_read_chip +} + +# --------------------------------------------------------- +# FRU +# --------------------------------------------------------- +# parse fru file to hex string which can be used in i2ctransfer +parse_fru_write_data(){ + if [ ! -e $fru_file_name ];then + fmt_print "console" $WARNING "Fru file not exist in current directory!" + fmt_print "console" $ERROR "Operation Failed!" + exit 1 + fi + + # calculate fru size + fru_write_size=`ls -lht | grep $fru_file_name | awk '{print $5}'` + fmt_print "console" $INFO "Fru File [$fru_file_name] size = $fru_write_size Bytes" + + # get fru raw data + fru_raw_data=`hexdump -C $fru_file_name | awk '{ + for(i=2;i<18;i++){ + print $i + } + }'` + + # parse data to hex string + fru_write_data=`echo $fru_raw_data | awk -v size=$fru_write_size '{ + for(i=1;i<=size;i++){ + printf "0x%s ",$i + } + }'` + fmt_print "console" $INFO "Success to get FRU data" +} + +read_fru(){ + res_fru=`i2ctransfer -y $i2c_bus w2@$chip_slave $fru_offset r256` + reset_pca9548 $i2c_bus $pca9548_slave + + # print fru data every 16 bytes per row + fmt_print "console" $INFO "The Fru Data :" + echo "$res_fru" | \ + awk '{ + line=""; + count=0; + + for(i=1; i<=NF; i++){ + hex=substr($i, 3); + + if(line != ""){ + line = line " "; + } + line = line hex; + + count++; + if (count == 16){ + print line; + line = ""; + count = 0; + } + } + + if(line != ""){ + print line; + } + }' + +} + +write_fru(){ + start_offset=1 + write_offset=0 + hex_offset="0x00" + while true + do + if [ $fru_write_size -eq 0 ];then + fmt_print "console" $INFO "Complete write Fru action!!!" + break + fi + + once_data=`echo $fru_write_data | awk -v start=$start_offset '{ + for(i=1;i<=NF;i++) + { + if(i>=start && i