diff --git a/nicsensor_s.sh b/nicsensor_s.sh
deleted file mode 100644
index aebb5eb..0000000
--- a/nicsensor_s.sh
+++ /dev/null
@@ -1,1212 +0,0 @@
-#!/bin/sh
-SCRIPT_VERSION="1.8s"
-# ---------------------------------------------------------
-# Project Feature Varible (Change as need)
-# ---------------------------------------------------------
-# ADC128 Division factor
-votage_division_factor_0="1"
-votage_division_factor_1="1"
-votage_division_factor_2="1"
-votage_division_factor_3="0.8"
-votage_division_factor_4="0.6"
-votage_division_factor_5="0.6"
-votage_division_factor_6="0.2326"
-votage_division_factor_7="1"
-
-# ADC128 channel name
-ADC128_Channel0_name="Channel0"
-ADC128_Channel1_name="Channel1"
-ADC128_Channel2_name="Channel2"
-ADC128_Channel3_name="Channel3"
-ADC128_Channel4_name="Channel4"
-ADC128_Channel5_name="Channel5"
-ADC128_Channel6_name="Channel6"
-ADC128_Channel7_name="Channel7"
-
-# INA3221 shunt resistor(unit: mohm)
-shunt_resistor_0="2"
-shunt_resistor_1="2"
-shunt_resistor_2="5"
-
-# INA3221 channel name
-INA3221_Channel0_name="Channel0"
-INA3221_Channel1_name="Channel1"
-INA3221_Channel2_name="Channel2"
-
-# EMC1413 channel name
-EMC1413_Channel0_name="Channel0"
-EMC1413_Channel1_name="Channel1"
-EMC1413_Channel2_name="Channel2"
-
-# TMP468 channel name
-TMP468_Channel0_name="Local"
-TMP468_Channel1_name="Remote1"
-TMP468_Channel2_name="Remote2"
-TMP468_Channel3_name="Remote3"
-TMP468_Channel4_name="Remote4"
-TMP468_Channel5_name="Remote5"
-TMP468_Channel6_name="Remote6"
-TMP468_Channel7_name="Remote7"
-TMP468_Channel8_name="Remote8"
-
-# TMP112 sensor name
-TMP112_Sensor_name="Temperature"
-
-# fru basic offset
-fru_offset="0x00 0x00"
-# ---------------------------------------------------------
-#  Global Settings
-# ---------------------------------------------------------
-Support_Sensor_List="emc1413, adc128, ina3221, tmp468, tmp112"
-Support_Server_List="5280m7, 5468m7, 5688m7, donghu, yichun, qiandaohu"
-# Which server will use this script
-server_type="5280m7"
-i2c_bus=12
-# ---------------------------------------------------------
-#  Global Varible (Don't Change)
-# ---------------------------------------------------------
-# Input Param
-nic_slot=$1
-sensor_type=$2
-chip_slave=$3
-option_data=$4
-option_data2=$5
-param_num=$#
-
-# REGISTER Table
-REG_pca9641_controll="0x01"
-REG_adc128_config="0x00"
-REG_adc128_advance="0x0b"
-REG_adc128_status="0x0c"
-REG_adc128_ch0="0x20"
-REG_adc128_ch1="0x21"
-REG_adc128_ch2="0x22"
-REG_adc128_ch3="0x23"
-REG_adc128_ch4="0x24"
-REG_adc128_ch5="0x25"
-REG_adc128_ch6="0x26"
-REG_adc128_ch7="0x27"
-REG_emc1413_TD1_H="0x00"
-REG_emc1413_TD1_L="0x29"
-REG_emc1413_TD2_H="0x01"
-REG_emc1413_TD2_L="0x10"
-REG_emc1413_TD3_H="0x23"
-REG_emc1413_TD3_L="0x24"
-REG_ina3221_ch1="0x01"
-REG_ina3221_ch2="0x03"
-REG_ina3221_ch3="0x05"
-REG_ina3221_bus1="0x02"
-REG_ina3221_bus2="0x04"
-REG_ina3221_bus3="0x06"
-REG_tmp112="0x00"
-REG_tmp468="0x80"
-
-# Global Param
-pca9641_slave=0x41
-pca9548_channel=0x04
-pca9548_slave=0x72
-is_have_pca9641=1
-INA3221_SHUNT_VOLT=0
-INA3221_BUS_VOLT=1
-INA3221_POWER=2
-ina3221_ch0_volt="0"
-ina3221_ch1_volt="0"
-ina3221_ch2_volt="0"
-ina3221_ch0_current="0"
-ina3221_ch1_current="0"
-ina3221_ch2_current="0"
-fru_file_name=$option_data2
-fru_write_size=0
-fru_write_data=""
-nic_type=""
-slot_number=""
-res_tmp468=""
-# ---------------------------------------------------------
-#  Script Function Defination
-# ---------------------------------------------------------
-print_usage(){
-    echo ""
-    echo "================>>> nicsensor script usage <<<=================="
-    echo "  Function 1 - Read Sensor Value"
-    echo "    1) Command Format  : ./nicsensor.sh [slot] [sensor tpye] [slave]"
-    echo "    2) Option Detail"
-    echo "       - [slot]        : 0 1 2 3 4 5 ..."
-    echo "       - [sensor type] : $Support_Sensor_List"
-    echo "       - [slave]       : chip slave address , please provide 7 bit address"
-    echo "    3) E.G.            : ./nicsensor.sh 1 adc128 0x1f"
-    echo "                         ./nicsensor.sh pcie1 ina3221 0x42"
-    echo "                         ./nicsensor.sh ocp0 emc1413 0x4c"
-    echo ""
-    echo "  Function 2 - Detect I2C for each slot"
-    echo "    1) Command Format  : ./nicsensor.sh detect [pcie/ocp]"
-    echo "    2) E.G.            :  ./nicsensor.sh detect pcie"
-    echo "                          ./nicsensor.sh detect ocp [some server don't support]"
-    echo "    3) Note            : This function now only support on server:"
-    echo "                         $Support_Server_List"
-    echo ""
-    echo "  Function 3 - Send an i2c command to chip on Nic"
-    echo "   1) Command Format   : ./nicsensor.sh [slot] chip [slave] [command]"
-    echo "   2) Option Detail"
-    echo "       - [slot]        : 0 1 2 3 4 5 ..."
-    echo "       - [slave]       : chip slave address , please provide 7 bit address"
-    echo "       - [command]     : The i2c command which will set to the chip"
-    echo "   3) E.G.             : ./nicsensor.sh pcie1 chip 0x10 'i2ctransfer -y 12 w1@0x10 0x00 r2'"
-    echo ""
-    echo "  Function 4 - FRU Read and Wirte"
-    echo "   1) Command Format   : ./nicsensor.sh [slot] fru [slave] [option] [frudata]"
-    echo "   2) Option Detail"
-    echo "       - [slot]        : 0 1 2 3 4 5 ..."
-    echo "       - [slave]       : chip slave address , please provide 7 bit address"
-    echo "       - [option]      : read/write, default to read"
-    echo "       - [frudata]     : fru bin file which will write to eeprom, only for write option"
-    echo "   3) E.G.             : ./nicsensor.sh pcie0 fru 0x57"
-    echo "                       : ./nicsensor.sh pcie0 fru 0x57 read"
-    echo "                       : ./nicsensor.sh pcie0 fru 0x57 write /tmp/fru.bin"
-    echo ""
-}
-
-fmt_print(){
-    if [ "$1" = "console" ];then
-        echo ">>> [$2] $3"
-    else
-        echo "[$2] $3"
-    fi
-}
-
-do_i2c_detect(){
-    if [ $nic_type = "ocp" ];then
-        fmt_print "console" $INFO "OCP slot $5 : bus$1 9548channel$4"
-    else
-        fmt_print "console" $INFO "PCIe slot $5 : bus$1 9548channel$4"
-    fi
-    i2ctransfer -y $1 w1@$2 $3
-    i2cdetect -y $1
-}
-
-reset_pca9548(){
-    i2ctransfer -y $1 w1@$2 0x00
-}
-
-# Get nic type and slot number
-parse_nic_slot(){
-    fullname=0
-    case $nic_slot in
-        ocp*)
-            nic_type="ocp"
-            ;;
-        pcie*)
-            nic_type="pcie"
-            fullname=1
-            ;;
-        *)
-            nic_type="pcie"
-            fullname=0;
-            ;;
-    esac
-
-    if [ $nic_type = "ocp" ];then
-        slot_number=$(echo $nic_slot | cut -b 4-)
-    else
-        if [ $fullname -eq 1 ];then
-            slot_number=$(echo $nic_slot | cut -b 5-)
-        else
-            slot_number=$nic_slot
-        fi
-    fi
-}
-
-get_pca9641_control(){
-    # Request 9641 lock
-    res_lock=`i2ctransfer -y $i2c_bus w2@$pca9641_slave $REG_pca9641_controll 0x81 r1`
-
-    # Build 9641 Connection 
-    res_build=`i2ctransfer -y $i2c_bus w2@$pca9641_slave $REG_pca9641_controll 0x85 r1`
-
-    if [ "$res_build" != "0x87" ];then
-        fmt_print "console" $ERROR "Cannot establish connection with pca9641 !!!"
-        exit 1
-    fi
-}
-
-switch_pca9548_channel(){
-    # set 9548 channel
-    res_setchannel=`i2ctransfer -y $i2c_bus w1@$pca9548_slave $pca9548_channel`
-}
-
-# pre execute hook function
-pre_exec_hook(){
-    # is param legel?
-    if [ "$Param2" = "chip" ];then
-        if [ $param_num -le 3 ];then
-            fmt_print "console" $ERROR "Command Format illegal"
-            echo "Command Format  : ./nicsensor.sh [slot] chip [slave] [i2c_command]"
-            exit 1
-        fi
-    fi
-
-    # if the action is fru write, need pre-process fru data
-    if [ "$Param2" = "fru" ];then
-        if [ "$option_data" = "write" ];then
-            
-            # is option_data(fru file name) valid?
-            if [ "$option_data2" = "" ];then
-                fmt_print "console" $ERROR "Please provide fru file name"
-                echo "Command Format : ./nicsensor.sh [slot] fru [slave] write [fru_file]"
-                exit 1
-            fi
-
-            parse_fru_write_data
-        fi
-    fi
-}
-
-# ---------------------------------------------------------
-#  Set i2c configuration
-# ---------------------------------------------------------
-set_configuration_5280m7(){
-    if [ $nic_type = "ocp" ];then
-        is_have_pca9641=0
-        pca9548_slave="0x70"
-        i2c_bus=3
-
-        if [ $slot_number -eq 0 ];then
-            pca9548_channel="0x01"
-        elif [ $slot_number -eq 1 ];then
-            pca9548_channel="0x02"
-        elif [ $slot_number -eq 2 ];then
-            pca9548_channel="0x04"
-        else
-            fmt_print "console" $WARNING "Unspecified card slot!"
-        fi
-    else
-        is_have_pca9641=1
-        if [ $slot_number -le 2 ];then
-            pca9641_slave="0x41"
-            pca9548_slave="0x72"
-            i2c_bus=12
-        else
-            pca9641_slave="0x42"
-            pca9548_slave="0x72"
-            i2c_bus=13
-        fi
-
-        if [ $slot_number -eq 0 ];then
-            pca9548_channel="0x02"
-        elif [ $slot_number -eq 1 ];then
-            pca9548_channel="0x04"
-        elif [ $slot_number -eq 2 ];then
-            pca9548_channel="0x08"
-        elif [ $slot_number -eq 3 ];then
-            pca9548_channel="0x02"
-        elif [ $slot_number -eq 4 ];then
-            pca9548_channel="0x04"
-        elif [ $slot_number -eq 5 ];then
-            pca9548_channel="0x08"
-        else
-            fmt_print "console" $WARNING "Unspecified card slot!"
-        fi
-    fi
-}
-
-set_configuration_5468m7(){
-    if [ $nic_type = "ocp" ];then
-        fmt_print "console" $ERROR "Unsupport OCP Nic on $server_type"
-        fmt_print "console" $INFO "Please check if script has update version"
-        exit 1
-    else
-        is_have_pca9641=1
-        if [ $slot_number -le 4 ];then
-            pca9641_slave="0x31"
-            pca9548_slave="0x70"
-            i2c_bus=13
-        else
-            pca9641_slave="0x42"
-            pca9548_slave="0x71"
-            i2c_bus=14
-        fi
-
-        if [ $slot_number -eq 0 ];then
-            pca9548_channel="0x01"
-        elif [ $slot_number -eq 1 ];then
-            pca9548_channel="0x02"
-        elif [ $slot_number -eq 2 ];then
-            pca9548_channel="0x04"
-        elif [ $slot_number -eq 3 ];then
-            pca9548_channel="0x08"
-        elif [ $slot_number -eq 4 ];then
-            pca9548_channel="0x10"
-        elif [ $slot_number -eq 5 ];then
-            pca9548_channel="0x01"
-        elif [ $slot_number -eq 6 ];then
-            pca9548_channel="0x02"
-        elif [ $slot_number -eq 7 ];then
-            pca9548_channel="0x04"
-        elif [ $slot_number -eq 8 ];then
-            pca9548_channel="0x08"
-        elif [ $slot_number -eq 9 ];then
-            pca9548_channel="0x10"
-        elif [ $slot_number -eq 10 ];then
-            pca9548_channel="0x20"
-        else
-            fmt_print "console" $WARNING "Unspecified card slot!"
-        fi    
-    fi
-}
-
-set_configuration_donghu(){
-    if [ $nic_type = "ocp" ];then
-        fmt_print "console" $ERROR "Unsupport OCP Nic on $server_type"
-        fmt_print "console" $INFO "Please check if script has update version"
-        exit 1
-    else
-        is_have_pca9641=0
-        i2c_bus=3
-        pca9548_slave="0x70"
-        if [ $slot_number -eq 0 ];then
-            pca9548_channel="0x80"
-        elif [ $slot_number -eq 1 ];then
-            pca9548_channel="0x40"
-        elif [ $slot_number -eq 2 ];then
-            pca9548_channel="0x20"
-        elif [ $slot_number -eq 3 ];then
-            pca9548_channel="0x10"
-        elif [ $slot_number -eq 4 ];then
-            pca9548_channel="0x08"
-        elif [ $slot_number -eq 5 ];then
-            pca9548_channel="0x04"
-        elif [ $slot_number -eq 6 ];then
-            pca9548_channel="0x02"
-        elif [ $slot_number -eq 7 ];then
-            pca9548_channel="0x01"
-        else
-            fmt_print "console" $WARNING "Unspecified card slot!"
-        fi
-    fi
-}
-
-set_configuration_yichun(){
-    if [ $nic_type = "ocp" ];then
-        fmt_print "console" $ERROR "Unsupport OCP Nic on $server_type"
-        fmt_print "console" $INFO "Please check if script has update version"
-        exit 1
-    else
-        is_have_pca9641=0
-        pca9548_slave="0x74"
-        if [ $slot_number -eq 0 ];then
-            i2c_bus=12
-            pca9548_channel="0x02"
-        elif [ $slot_number -eq 1 ];then
-            i2c_bus=13
-            pca9548_channel="0x02"
-        elif [ $slot_number -eq 2 ];then
-            i2c_bus=14
-            pca9548_channel="0x02"
-        else
-            fmt_print "console" $WARNING "Unspecified card slot!"
-        fi
-    fi
-}
-
-set_configuration_qiandaohu(){
-    if [ $nic_type = "ocp" ];then
-        fmt_print "console" $ERROR "Unsupport OCP Nic on $server_type"
-        fmt_print "console" $INFO "Please check if script has update version"
-        exit 1
-    else
-        is_have_pca9641=0
-        if [ $slot_number -le 7 ];then
-            i2c_bus=3
-            pca9548_slave=0x70
-        else
-            i2c_bus=6
-            pca9548_slave=0x71
-        fi
-        if [ $slot_number -eq 0 ];then
-            pca9548_channel="0x08"
-        elif [ $slot_number -eq 1 ];then
-            pca9548_channel="0x04"
-        elif [ $slot_number -eq 2 ];then
-            pca9548_channel="0x01"
-        elif [ $slot_number -eq 3 ];then
-            pca9548_channel="0x02"
-        elif [ $slot_number -eq 4 ];then
-            pca9548_channel="0x80"
-        elif [ $slot_number -eq 5 ];then
-            pca9548_channel="0x40"
-        elif [ $slot_number -eq 6 ];then
-            pca9548_channel="0x10"
-        elif [ $slot_number -eq 7 ];then
-            pca9548_channel="0x20"
-        elif [ $slot_number -eq 8 ];then
-            pca9548_channel="0x08"
-        elif [ $slot_number -eq 9 ];then
-            pca9548_channel="0x04"
-        elif [ $slot_number -eq 10 ];then
-            pca9548_channel="0x01"
-        elif [ $slot_number -eq 11 ];then
-            pca9548_channel="0x02"
-        else
-            fmt_print "console" $WARNING "Unspecified card slot!"
-        fi
-    fi    
-}
-
-set_configuration_5688m7(){
-    if [ $nic_type = "ocp" ];then
-        fmt_print "console" $ERROR "Unsupport OCP Nic on $server_type"
-        fmt_print "console" $INFO "Please check if script has update version"
-        exit 1
-    else
-        is_have_pca9641=1
-        pca9641_slave="0x31"
-        i2c_bus=12
-        if [ $slot_number -le 3 ];then
-            pca9548_slave=0x71
-        else
-            pca9548_slave=0x72
-        fi
-        if [ $slot_number -eq 0 ];then
-            pca9548_channel="0x01"
-        elif [ $slot_number -eq 1 ];then
-            pca9548_channel="0x02"
-        elif [ $slot_number -eq 2 ];then
-            pca9548_channel="0x04"
-        elif [ $slot_number -eq 3 ];then
-            pca9548_channel="0x08"
-        elif [ $slot_number -eq 4 ];then
-            pca9548_channel="0x01"
-        elif [ $slot_number -eq 5 ];then
-            pca9548_channel="0x02"
-        elif [ $slot_number -eq 6 ];then
-            pca9548_channel="0x04"
-        elif [ $slot_number -eq 7 ];then
-            pca9548_channel="0x08"
-        else
-            fmt_print "console" $WARNING "Unspecified card slot!"
-        fi
-    fi
-}
-
-# Base on the server type, set i2c conf
-set_configuration(){
-    parse_nic_slot
-
-    case $server_type in
-        "5280m7")
-            # Support PCIe and OCP configuration
-            set_configuration_5280m7
-            ;;
-        "5468m7")
-            set_configuration_5468m7
-            ;;
-        "donghu")
-            set_configuration_donghu
-            ;;
-        "yichun")
-            set_configuration_yichun
-            ;;
-        "qiandaohu")
-            set_configuration_qiandaohu
-            ;;
-        "5688m7")
-            set_configuration_5688m7
-            ;;
-        *)
-            fmt_print "console" $ERROR "Error: Unsupport Server Type !!! - $server_type"
-            fmt_print "console" $INFO "Support list: $Support_Server_List"
-            exit 1
-            ;;
-    esac
-}
-
-# ---------------------------------------------------------
-#  Chip EMC1413
-# ---------------------------------------------------------
-# process sensor data then print to console 
-# @Param1 emc1413 data high 8bit
-# @Param2 emc1413 data low 8bit
-# @Param3 customization channel name
-convert_emc1413_data(){
-    if [ "$3" = "disable" ];then
-        return
-    fi
-    # remove data prefix '0x'
-    hex_value1=$(echo "$1" | awk '{sub(/^0x/,""); print}')
-    hex_value2=$(echo "$2" | awk '{sub(/^0x/,""); print}')
-    upper_hex_value1=$(echo "$hex_value1" | awk '{ 
-        for(i=1; i<=length($0); i++){ 
-            if(tolower(substr($0,i,1)) ~ /^[a-f]$/) 
-                printf toupper(substr($0,i,1)); 
-            else 
-                printf substr($0,i,1); 
-        } 
-        print "" 
-    }')
-    upper_hex_value2=$(echo "$hex_value2" | awk '{ 
-        for(i=1; i<=length($0); i++){ 
-            if(tolower(substr($0,i,1)) ~ /^[a-f]$/) 
-                printf toupper(substr($0,i,1)); 
-            else 
-                printf substr($0,i,1); 
-        } 
-        print "" 
-    }')
-    dec_value1=$(echo "ibase=16; $upper_hex_value1" | bc)
-    dec_value2=$(echo "ibase=16; $upper_hex_value2" | bc)
-    temp=$(echo "scale=4; $dec_value1 + ($dec_value2 / 32 * 0.125 )" | bc)
-    format_temp=$(echo "$temp" | awk '{ if ($0 ~ /^\./) print "0" $0; else print $0 }')
-    echo "$3 : $format_temp C"
-}
-
-# Get the sensor data, then parse raw data
-read_emc1413_channel_value(){
-    res_td1_h=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_emc1413_TD1_H r1`
-    res_td1_l=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_emc1413_TD1_L r1`
-    res_td2_h=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_emc1413_TD2_H r1`
-    res_td2_l=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_emc1413_TD2_L r1`
-    res_td3_h=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_emc1413_TD3_H r1`
-    res_td3_l=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_emc1413_TD3_L r1`
-    reset_pca9548 $i2c_bus $pca9548_slave
-
-    echo ">>> The emc1413 value is:"
-    convert_emc1413_data $res_td1_h $res_td1_l "$EMC1413_Channel0_name" 
-    convert_emc1413_data $res_td2_h $res_td2_l "$EMC1413_Channel1_name"
-    convert_emc1413_data $res_td3_h $res_td3_l "$EMC1413_Channel2_name"
-}
-
-process_emc1413(){
-    read_emc1413_channel_value
-}
-
-# ---------------------------------------------------------
-#  Chip ADC128
-# ---------------------------------------------------------
-# adc128 chip init if need
-check_adc128_init(){
-    # Get Reg 0x00 status
-    res_adc128_status=`i2cget -y $i2c_bus $chip_slave $REG_adc128_config`
-
-    # if stauts is not 0x01 (Start Monitor) ,then do init
-    if [ "$res_adc128_status" != "0x01" ];then
-        # Init ADC128 work as mode 1 (0x02)
-        res_adc128_advance=`i2ctransfer -y $i2c_bus w2@$chip_slave $REG_adc128_advance 0x02`
-        # Set ADC128 on start (0x01)
-        res_adc128_setstart=`i2ctransfer -y $i2c_bus w2@$chip_slave $REG_adc128_config 0x01 r1`
-    fi
-}
-
-# process sensor data then print to console 
-# @Param 1 adc128 data high 8bit
-# @Param 2 adc128 data low 8bit
-# @Param 3 customization channel name
-# @Param 4 division factor
-convert_adc128_data(){
-    if [ "$3" = "disable" ];then
-        return
-    fi
-    # remove data prefix '0x'
-    hex_value1=$(echo "$1" | awk '{sub(/^0x/,""); print}')
-    hex_value2=$(echo "$2" | awk '{sub(/^0x/,""); print}')
-    merge_value="${hex_value1}${hex_value2}"
-    upper_hex_value=$(echo "$merge_value" | awk '{ 
-        for(i=1; i<=length($0); i++){ 
-            if(tolower(substr($0,i,1)) ~ /^[a-f]$/) 
-                printf toupper(substr($0,i,1)); 
-            else 
-                printf substr($0,i,1); 
-        } 
-        print "" 
-    }')
-    dec_val=$(echo "ibase=16; $upper_hex_value" | bc)
-    volt=$(echo "scale=4; $dec_val / 16 / 4096 * 2.65 / $4" | bc)
-    format_volt=$(echo "$volt" | awk '{ if ($0 ~ /^\./) print "0" $0; else print $0 }')
-    echo "$3 : $format_volt V"
-}
-
-# Get the sensor data, then parse raw data
-read_adc128_channel_value(){
-    res_ch0=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_adc128_ch0 r2`
-    res_ch1=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_adc128_ch1 r2`
-    res_ch2=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_adc128_ch2 r2`
-    res_ch3=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_adc128_ch3 r2`
-    res_ch4=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_adc128_ch4 r2`
-    res_ch5=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_adc128_ch5 r2`
-    res_ch6=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_adc128_ch6 r2`
-    res_ch7=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_adc128_ch7 r2`
-    reset_pca9548 $i2c_bus $pca9548_slave
-    echo ">>> The ADC128 value is :"
-    convert_adc128_data $res_ch0 "$ADC128_Channel0_name" $votage_division_factor_0
-    convert_adc128_data $res_ch1 "$ADC128_Channel1_name" $votage_division_factor_1
-    convert_adc128_data $res_ch2 "$ADC128_Channel2_name" $votage_division_factor_2
-    convert_adc128_data $res_ch3 "$ADC128_Channel3_name" $votage_division_factor_3
-    convert_adc128_data $res_ch4 "$ADC128_Channel4_name" $votage_division_factor_4
-    convert_adc128_data $res_ch5 "$ADC128_Channel5_name" $votage_division_factor_5
-    convert_adc128_data $res_ch6 "$ADC128_Channel6_name" $votage_division_factor_6
-    convert_adc128_data $res_ch7 "$ADC128_Channel7_name" $votage_division_factor_7
-}
-
-process_adc128(){
-    check_adc128_init
-    read_adc128_channel_value 
-}
-
-# ---------------------------------------------------------
-#  Chip INA3221
-# ---------------------------------------------------------
-# process sensor data then print to console
-# @Param1 ina3221 data high 8bit
-# @Param2 ina3221 data high 8bit
-# @Param3 channel number
-# @Param4 mode select 0 - shunt volt
-#                     1 - bus volt
-# @Param5 shunt resistor(only used in mode shunt volt)
-# @Param6 customization channel name
-convert_ina3221_data(){
-    if [ "$6" = "disable" ];then
-        return
-    fi
-
-    hex_value1=$(echo "$1" | awk '{sub(/^0x/,""); print}')
-    hex_value2=$(echo "$2" | awk '{sub(/^0x/,""); print}')
-    merge_value="${hex_value1}${hex_value2}"
-    upper_hex_value=$(echo "$merge_value" | awk '{ 
-        for(i=1; i<=length($0); i++){ 
-            if(tolower(substr($0,i,1)) ~ /^[a-f]$/) 
-                printf toupper(substr($0,i,1)); 
-            else 
-                printf substr($0,i,1); 
-        } 
-        print "" 
-    }')
-    dec_val=$(echo "ibase=16; $upper_hex_value" | bc)
-
-    if [ $4 -eq $INA3221_BUS_VOLT ];then
-        volt=$(echo "scale=4; $dec_val / 8 * 40 / 10000 * 2" | bc)
-        format_volt=$(echo "$volt" | awk '{ if ($0 ~ /^\./) print "0" $0; else print $0 }')
-        echo "$6 : $format_volt V"
-        if [ $3 -eq 0 ];then
-            ina3221_ch0_volt=$format_volt
-        elif [ $3 -eq 1 ];then
-            ina3221_ch1_volt=$format_volt
-        else
-            ina3221_ch2_volt=$format_volt
-        fi
-
-    elif [ $4 -eq $INA3221_SHUNT_VOLT ];then
-        current_mv=$(echo "scale=4; $dec_val / 8 * 40 / 1000" | bc)
-        current=$(echo "scale=4; $current_mv / $5" | bc)
-        format_current=$(echo "$current" | awk '{ if ($0 ~ /^\./) print "0" $0; else print $0 }')
-        format_current_mv=$(echo "$current_mv" | awk '{ if ($0 ~ /^\./) print "0" $0; else print $0 }')
-        echo "$6 : $format_current A, shunt volt: $format_current_mv mV, shunt resistor: $5 mOhm"
-        if [ $3 -eq 0 ];then
-            ina3221_ch0_current=$format_current
-        elif [ $3 -eq 1 ];then
-            ina3221_ch1_current=$format_current
-        else
-            ina3221_ch2_current=$format_current
-        fi
-
-    elif [ $4 -eq $INA3221_POWER ];then
-        power_ch0=$(echo "scale=4; $ina3221_ch0_volt * $ina3221_ch0_current" | bc)
-        power_ch1=$(echo "scale=4; $ina3221_ch1_volt * $ina3221_ch1_current" | bc)
-        power_ch2=$(echo "scale=4; $ina3221_ch2_volt * $ina3221_ch2_current" | bc)
-        format_power_ch0=$(echo "$power_ch0" | awk '{ if ($0 ~ /^\./) print "0" $0; else print $0 }')
-        format_power_ch1=$(echo "$power_ch1" | awk '{ if ($0 ~ /^\./) print "0" $0; else print $0 }')
-        format_power_ch2=$(echo "$power_ch2" | awk '{ if ($0 ~ /^\./) print "0" $0; else print $0 }')
-        total_power=$(echo "scale=4; $power_ch0 + $power_ch1 + $power_ch2" | bc)
-        echo "$INA3221_Channel0_name  : $format_power_ch0 W"
-        echo "$INA3221_Channel1_name  : $format_power_ch1 W"
-        echo "$INA3221_Channel2_name  : $format_power_ch2 W"
-        echo "total power: $total_power W"
-    fi
-}
-
-# Get the sensor data, then parse raw data
-read_ina3221_channel_value(){
-    res_ch0=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_ina3221_ch1 r2`
-    res_ch1=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_ina3221_ch2 r2`
-    res_ch2=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_ina3221_ch3 r2`
-    res_bus0=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_ina3221_bus1 r2`
-    res_bus1=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_ina3221_bus2 r2`
-    res_bus2=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_ina3221_bus3 r2`
-    reset_pca9548 $i2c_bus $pca9548_slave
-
-    # start parse raw data
-    echo ">>> The INA3221 shunt value is :"
-    convert_ina3221_data $res_ch0 0 $INA3221_SHUNT_VOLT $shunt_resistor_0 "$INA3221_Channel0_name"
-    convert_ina3221_data $res_ch1 1 $INA3221_SHUNT_VOLT $shunt_resistor_1 "$INA3221_Channel1_name"
-    convert_ina3221_data $res_ch2 2 $INA3221_SHUNT_VOLT $shunt_resistor_2 "$INA3221_Channel2_name"
-    echo ">>> The INA3221 bus value is :"
-    convert_ina3221_data $res_bus0 0 $INA3221_BUS_VOLT null "$INA3221_Channel0_name"
-    convert_ina3221_data $res_bus1 1 $INA3221_BUS_VOLT null "$INA3221_Channel1_name"
-    convert_ina3221_data $res_bus2 2 $INA3221_BUS_VOLT null "$INA3221_Channel2_name"
-    echo ">>> The INA3221 bus power is :"
-    convert_ina3221_data 0 0 0 $INA3221_POWER
-}
-
-process_ina3221(){
-    read_ina3221_channel_value
-}
-# ---------------------------------------------------------
-#  Chip TMP468
-# ---------------------------------------------------------
-# @Param1 tmp468 data high 8bit
-# @Param2 tmp468 data high 8bit
-# @Param3 customization channel name
-convert_tmp468_data(){
-    if [ "$3" = "disable" ];then
-        return
-    fi
-    hex_value1=$(echo "$1" | awk '{sub(/^0x/,""); print}')
-    hex_value2=$(echo "$2" | awk '{sub(/^0x/,""); print}')
-    merge_value="${hex_value1}${hex_value2}"
-    upper_hex_value=$(echo "$merge_value" | awk '{ 
-        for(i=1; i<=length($0); i++){ 
-            if(tolower(substr($0,i,1)) ~ /^[a-f]$/) 
-                printf toupper(substr($0,i,1)); 
-            else 
-                printf substr($0,i,1); 
-        } 
-        print "" 
-    }')
-    dec_val=$(echo "ibase=16; $upper_hex_value" | bc)
-    
-    temp=$(echo "scale=4; $dec_val / 8 * 0.0625" | bc)
-    echo "$3 : $temp "
-}
-
-read_tmp468_value(){
-    res_tmp468=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_tmp468 r18`
-    reset_pca9548 $i2c_bus $pca9548_slave
-
-    tmp468_res1_h=`echo $res_tmp468 | awk '{print $1}'`
-    tmp468_res1_l=`echo $res_tmp468 | awk '{print $2}'`
-    tmp468_res2_h=`echo $res_tmp468 | awk '{print $3}'`
-    tmp468_res2_l=`echo $res_tmp468 | awk '{print $4}'`
-    tmp468_res3_h=`echo $res_tmp468 | awk '{print $5}'`
-    tmp468_res3_l=`echo $res_tmp468 | awk '{print $6}'`
-    tmp468_res4_h=`echo $res_tmp468 | awk '{print $7}'`
-    tmp468_res4_l=`echo $res_tmp468 | awk '{print $8}'`
-    tmp468_res5_h=`echo $res_tmp468 | awk '{print $9}'`
-    tmp468_res5_l=`echo $res_tmp468 | awk '{print $10}'`
-    tmp468_res6_h=`echo $res_tmp468 | awk '{print $11}'`
-    tmp468_res6_l=`echo $res_tmp468 | awk '{print $12}'`
-    tmp468_res7_h=`echo $res_tmp468 | awk '{print $13}'`
-    tmp468_res7_l=`echo $res_tmp468 | awk '{print $14}'`
-    tmp468_res8_h=`echo $res_tmp468 | awk '{print $15}'`
-    tmp468_res8_l=`echo $res_tmp468 | awk '{print $16}'`
-    tmp468_res9_h=`echo $res_tmp468 | awk '{print $17}'`
-    tmp468_res9_l=`echo $res_tmp468 | awk '{print $18}'`
-
-    fmt_print "console" $INFO "Tmp468 read result:"
-    convert_tmp468_data $tmp468_res1_h $tmp468_res1_l "$TMP468_Channel0_name"
-    convert_tmp468_data $tmp468_res2_h $tmp468_res2_l "$TMP468_Channel1_name"
-    convert_tmp468_data $tmp468_res3_h $tmp468_res3_l "$TMP468_Channel2_name"
-    convert_tmp468_data $tmp468_res4_h $tmp468_res4_l "$TMP468_Channel3_name"
-    convert_tmp468_data $tmp468_res5_h $tmp468_res5_l "$TMP468_Channel4_name"
-    convert_tmp468_data $tmp468_res6_h $tmp468_res6_l "$TMP468_Channel5_name"
-    convert_tmp468_data $tmp468_res7_h $tmp468_res7_l "$TMP468_Channel6_name"
-    convert_tmp468_data $tmp468_res8_h $tmp468_res8_l "$TMP468_Channel7_name"
-    convert_tmp468_data $tmp468_res9_h $tmp468_res9_l "$TMP468_Channel8_name"
-}
-
-process_tmp468(){
-    read_tmp468_value
-}
-
-# ---------------------------------------------------------
-#  Chip TMP112
-# ---------------------------------------------------------
-# @Param1 tmp112 data high 8bit
-# @Param2 tmp112 data low 8bit
-# @Param3 customization sensor name
-convert_tmp112_data(){
-    if [ "$3" = "disable" ];then
-        return
-    fi
-
-    hex_value1=$(echo "$1" | awk '{sub(/^0x/,""); print}')
-    hex_value2=$(echo "$2" | awk '{sub(/^0x/,""); print}')
-    merge_value="${hex_value1}${hex_value2}"
-    upper_hex_value=$(echo "$merge_value" | awk '{ 
-        for(i=1; i<=length($0); i++){ 
-            if(tolower(substr($0,i,1)) ~ /^[a-f]$/) 
-                printf toupper(substr($0,i,1)); 
-            else 
-                printf substr($0,i,1); 
-        } 
-        print "" 
-    }')
-    dec_val=$(echo "ibase=16; $upper_hex_value" | bc)
-
-    binary_number=$(echo "ibase=16;obase=2;$upper_hex_value" | bc)
-    bin_length=$(echo $binary_number | awk '{print length($0)}')
-    last_digit=$(echo $binary_number | cut -c $bin_length)
-    if [ $last_digit -eq 0 ];then
-        temp=$(echo "scale=4; $dec_val / 16 * 0.0625" | bc)
-    elif [ $last_digit -eq 1 ];then
-        temp=$(echo "scale=4; ( $dec_val - 1 ) / 8 * 0.0625" | bc)
-    fi
-
-    echo "$3 : $temp"
-}
-
-read_tmp112_value(){
-    res_tmp112=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_tmp112 r2`
-    reset_pca9548 $i2c_bus $pca9548_slave
-
-    fmt_print "console" $INFO "Tmp112 read result:"
-    convert_tmp112_data $res_tmp112 "$TMP112_Sensor_name"
-}
-
-process_tmp112(){
-    read_tmp112_value
-}
-# ---------------------------------------------------------
-#  CHIP
-# ---------------------------------------------------------
-# do a customization command
-write_read_chip(){
-    cmd_wr=$option_data
-    res_wr=`$cmd_wr`
-    reset_pca9548 $i2c_bus $pca9548_slave
-
-    fmt_print "console" $INFO "Chip Command: $cmd_wr"
-    fmt_print "console" $INFO "The Result  : $res_wr"
-}
-
-process_chip(){
-    write_read_chip
-}
-
-# ---------------------------------------------------------
-#  FRU
-# ---------------------------------------------------------
-# parse fru file to hex string which can be used in i2ctransfer
-parse_fru_write_data(){
-    if [ ! -e $fru_file_name ];then
-        fmt_print "console" $WARNING "Fru file not exist in current directory!"
-        fmt_print "console" $ERROR "Operation Failed!"
-        exit 1
-    fi
-    
-    # calculate fru size
-    fru_write_size=`ls -lht | grep $fru_file_name | awk '{print $5}'`
-    fmt_print "console" $INFO "Fru File [$fru_file_name] size = $fru_write_size Bytes"
-
-    # get fru raw data
-    fru_raw_data=`hexdump -C $fru_file_name | awk '{
-        for(i=2;i<18;i++){
-            print $i
-        }
-    }'`
-
-    # parse data to hex string
-    fru_write_data=`echo $fru_raw_data | awk -v size=$fru_write_size '{
-        for(i=1;i<=size;i++){
-            printf "0x%s ",$i
-        }
-    }'`
-    fmt_print "console" $INFO "Success to get FRU data"
-}
-
-read_fru(){
-    res_fru=`i2ctransfer -y $i2c_bus w2@$chip_slave $fru_offset r256`
-    reset_pca9548 $i2c_bus $pca9548_slave
-
-    # print fru data every 16 bytes per row
-    fmt_print "console" $INFO "The Fru Data :"
-    echo "$res_fru" | \
-    awk '{
-        line="";
-        count=0;
-
-        for(i=1; i<=NF; i++){
-            hex=substr($i, 3);
-
-            if(line != ""){
-                line = line " ";
-            }
-            line = line hex;
-
-            count++;
-            if (count == 16){
-                print line;
-                line = "";
-                count = 0;
-            }
-        }
-
-        if(line != ""){
-            print line;
-        }
-    }'
-
-}
-
-write_fru(){
-    start_offset=1
-    write_offset=0
-    hex_offset="0x00"
-    while true
-    do
-        if [ $fru_write_size -eq 0 ];then
-            fmt_print "console" $INFO "Complete write Fru action!!!"
-            break
-        fi
-
-        once_data=`echo $fru_write_data | awk -v start=$start_offset '{
-            for(i=1;i<=NF;i++)
-            {
-                if(i>=start && i<start+8)
-                {
-                    printf "%s ", $i
-                }
-            }
-        }'`
-        fmt_print "console" $INFO "Start write fru data : $once_data"
-
-        # do once write
-        hex_num=$(echo "obase=16; $write_offset" | bc)
-        hex_offset=$(echo $hex_num | awk '{printf("0x%s", $0)}')
-        write_command="i2ctransfer -y $i2c_bus w10@$chip_slave 0x00 $hex_offset $once_data"
-        write_res=`$write_command`	
-        
-        # counting varible iterate
-        write_offset=$(($write_offset+8))
-        start_offset=$(($start_offset+8))
-        fru_write_size=$(($fru_write_size-8))
-    done
-    reset_pca9548 $i2c_bus $pca9548_slave
-}
-
-process_fru(){
-    if [ "$option_data" = "write" ];then
-        write_fru
-    else
-        read_fru
-    fi
-}
-# ---------------------------------------------------------
-#  END of CHIP Function
-# ---------------------------------------------------------
-start_get_sensor(){
-    # switch pca9641 and pca9548
-    set_configuration
-    # if we have 9641 on i2c, then do it
-    if [ $is_have_pca9641 -eq 1 ];then
-        get_pca9641_control
-    fi
-    switch_pca9548_channel
-
-    # get sensor detail value
-    case $sensor_type in
-        "emc1413")
-            process_emc1413
-            ;;
-        "adc128")
-            process_adc128
-            ;;
-        "ina3221")
-            process_ina3221
-            ;;
-        "tmp468")
-            process_tmp468
-            ;; 
-        "tmp112")
-            process_tmp112
-            ;;
-        "chip")
-            process_chip
-            ;;
-        "fru")
-            process_fru
-            ;;
-        *)
-            fmt_print "console" $ERROR "Unsupport Sensor Type !!! - $sensor_type"
-            fmt_print "console" $INFO "Support list: $Support_Sensor_List"
-            print_usage
-            ;;
-    esac
-}
-
-detect_on_5280m7(){
-    if [ $nic_type = "ocp" ];then
-        i2c_bus=3
-        do_i2c_detect $i2c_bus 0x70 0x01 0 0
-        do_i2c_detect $i2c_bus 0x70 0x02 1 1
-        do_i2c_detect $i2c_bus 0x70 0x04 2 2
-        reset_pca9548 $i2c_bus 0x70
-    else
-        i2c_bus=12
-        pca9641_slave="0x41"
-        get_pca9641_control
-        do_i2c_detect $i2c_bus 0x72 0x02 1 0
-        do_i2c_detect $i2c_bus 0x72 0x04 2 1
-        do_i2c_detect $i2c_bus 0x72 0x08 3 2
-        reset_pca9548 $i2c_bus 0x72
-        i2c_bus=13
-        pca9641_slave="0x42"
-        get_pca9641_control
-        do_i2c_detect $i2c_bus 0x72 0x02 1 3
-        do_i2c_detect $i2c_bus 0x72 0x04 2 4
-        do_i2c_detect $i2c_bus 0x72 0x08 3 5
-        reset_pca9548 $i2c_bus 0x72
-    fi
-}
-
-detect_on_5468m7(){
-    if [ $nic_type = "ocp" ];then
-        fmt_print "console" $ERROR "Unsupport OCP Nic on $server_type"
-        exit 1
-    fi
-    i2c_bus=13
-    pca9641_slave="0x31"
-    get_pca9641_control
-    do_i2c_detect $i2c_bus 0x70 0x01 0 0
-    do_i2c_detect $i2c_bus 0x70 0x02 1 1
-    do_i2c_detect $i2c_bus 0x70 0x04 2 2
-    do_i2c_detect $i2c_bus 0x70 0x08 3 3
-    do_i2c_detect $i2c_bus 0x70 0x10 4 4
-    reset_pca9548 $i2c_bus 0x70
-    i2c_bus=14
-    pca9641_slave="0x42"
-    get_pca9641_control
-    do_i2c_detect $i2c_bus 0x71 0x01 0 5
-    do_i2c_detect $i2c_bus 0x71 0x02 1 6
-    do_i2c_detect $i2c_bus 0x71 0x04 2 7
-    do_i2c_detect $i2c_bus 0x71 0x08 3 8
-    do_i2c_detect $i2c_bus 0x71 0x10 4 9
-    do_i2c_detect $i2c_bus 0x71 0x20 5 10
-    reset_pca9548 $i2c_bus 0x71
-}
-
-detect_on_donghu(){
-    if [ $nic_type = "ocp" ];then
-        fmt_print "console" $ERROR "Unsupport OCP Nic on $server_type"
-        exit 1
-    fi
-    i2c_bus=3
-    do_i2c_detect $i2c_bus 0x70 0x80 7 0
-    do_i2c_detect $i2c_bus 0x70 0x40 6 1
-    do_i2c_detect $i2c_bus 0x70 0x20 5 2
-    do_i2c_detect $i2c_bus 0x70 0x10 4 3
-    do_i2c_detect $i2c_bus 0x70 0x08 3 4
-    do_i2c_detect $i2c_bus 0x70 0x04 2 5
-    do_i2c_detect $i2c_bus 0x70 0x02 1 6
-    do_i2c_detect $i2c_bus 0x70 0x01 0 7
-    reset_pca9548 $i2c_bus 0x70
-}
-
-detect_on_yichun(){
-    if [ $nic_type = "ocp" ];then
-        fmt_print "console" $ERROR "Unsupport OCP Nic on $server_type"
-        exit 1
-    fi
-    i2c_bus=12
-    do_i2c_detect $i2c_bus 0x74 0x02 2 0
-    reset_pca9548 $i2c_bus 0x74
-    i2c_bus=13
-    do_i2c_detect $i2c_bus 0x74 0x02 2 1
-    reset_pca9548 $i2c_bus 0x74
-    i2c_bus=14
-    do_i2c_detect $i2c_bus 0x74 0x02 2 2
-    reset_pca9548 $i2c_bus 0x74
-}
-
-detect_on_qiandaohu(){
-    if [ $nic_type = "ocp" ];then
-        fmt_print "console" $ERROR "Unsupport OCP Nic on $server_type"
-        exit 1
-    fi
-    i2c_bus=3
-    do_i2c_detect $i2c_bus 0x70 0x08 3 0
-    do_i2c_detect $i2c_bus 0x70 0x04 2 1
-    do_i2c_detect $i2c_bus 0x70 0x01 0 2
-    do_i2c_detect $i2c_bus 0x70 0x02 1 3
-    do_i2c_detect $i2c_bus 0x70 0x80 7 4
-    do_i2c_detect $i2c_bus 0x70 0x40 6 5
-    do_i2c_detect $i2c_bus 0x70 0x10 4 6
-    do_i2c_detect $i2c_bus 0x70 0x20 5 7
-    reset_pca9548 $i2c_bus 0x70
-    i2c_bus=6
-    do_i2c_detect $i2c_bus 0x71 0x08 3 8
-    do_i2c_detect $i2c_bus 0x71 0x04 2 9
-    do_i2c_detect $i2c_bus 0x71 0x01 0 10
-    do_i2c_detect $i2c_bus 0x71 0x08 3 11
-    reset_pca9548 $i2c_bus 0x71
-}
-
-detect_on_5688m7(){
-    if [ $nic_type = "ocp" ];then
-        fmt_print "console" $ERROR "Unsupport OCP Nic on $server_type"
-        exit 1
-    fi
-    i2c_bus=12
-    pca9641_slave="0x31"
-    get_pca9641_control
-    do_i2c_detect $i2c_bus 0x71 0x01 0 0
-    do_i2c_detect $i2c_bus 0x71 0x02 1 1
-    do_i2c_detect $i2c_bus 0x71 0x04 2 2
-    do_i2c_detect $i2c_bus 0x71 0x08 3 3
-    reset_pca9548 $i2c_bus 0x71
-    do_i2c_detect $i2c_bus 0x72 0x01 0 4
-    do_i2c_detect $i2c_bus 0x72 0x02 1 5
-    do_i2c_detect $i2c_bus 0x72 0x04 2 6
-    do_i2c_detect $i2c_bus 0x72 0x08 3 7
-    reset_pca9548 $i2c_bus 0x72
-}
-
-start_detect_device(){
-    fmt_print "console" $INFO "Detect on server : $server_type, nic type: $nic_type"
-    case $server_type in
-        "5280m7")
-            detect_on_5280m7
-            ;;
-        "5468m7")
-            detect_on_5468m7
-            ;;
-        "donghu")
-            detect_on_donghu
-            ;;
-        "yichun")
-            detect_on_yichun
-            ;;
-        "qiandaohu")
-            detect_on_qiandaohu
-            ;;
-        "5688m7")
-            detect_on_5688m7
-            ;;
-        *)
-            fmt_print "console" $ERROR "Unsupport Server Type - $server_type"
-            fmt_print "console" $INFO "Support list : $Support_Server_List"
-            ;;
-    esac
-}
-# ---------------------------------------------------------
-#  Start Execute Script(main)
-# ---------------------------------------------------------
-pre_exec_hook
-if [ "$1" = "version" ];then
-    echo "Script Version : $SCRIPT_VERSION"
-    exit 0
-fi
-if [ "$1" = "detect" ];then
-    if [ "$2" = "ocp" ];then
-        nic_type="ocp"
-    elif [ "$2" = "pcie" ];then
-        nic_type="pcie"
-    else
-        fmt_print "console" $WARNING "Please provide valid nic type, default to pcie"
-        nic_type="pcie"
-    fi
-
-    start_detect_device
-    exit 0
-fi
-if [ $param_num -le 2 ];then
-    print_usage
-else
-    start_get_sensor
-fi