feat(master : nicsensor) version change to intest 1.7.7

nicsensor.sh

@@ -1,5 +1,5 @@
 #!/bin/sh
-SCRIPT_VERSION="1.7.6"
+SCRIPT_VERSION="1.7.7"
 # ---------------------------------------------------------
 # Project Feature Varible (Change as need)
 # ---------------------------------------------------------
@@ -81,6 +81,11 @@ option_data=$4
 option_data2=$5
 param_num=$#
 
+# Param alias
+Param1=$1
+Param2=$2
+Param3=$3
+
 # REGISTER Table
 REG_pca9641_controll="0x01"
 REG_adc128_config="0x00"
@@ -175,6 +180,14 @@ print_usage(){
     echo "                       : ./nicsensor.sh pcie0 fru 0x57 read"
     echo "                       : ./nicsensor.sh pcie0 fru 0x57 write /tmp/fru.bin"
     echo ""
+    echo "  Function 5 - Settings"
+    echo "   1) Command Format   : ./nicsensor.sh [get/set] [property] [value]"
+    echo "   2) Option Detail"
+    echo "       - [property]    : debug, detect, server"
+    echo "       - [value]       : property's value"
+    echo "   3) E.G.             : ./nicsensor.sh set server 5280m7"
+    echo "                       : ./nicsensor.sh set debug 1"
+    echo "                       : ./nicsensor.sh set detect 1"
 }
 
 # print format message to console|debuglog
@@ -242,6 +255,50 @@ parse_nic_slot(){
     fmt_print "log" $INFO "Slot Num : $slot_number"
 }
 
+get_set_properties(){
+    if [ "$Param2" = "server" ];then
+        target_file="/tmp/ns_servertype"
+        default_data=$server_type
+    elif [ "$Param2" = "debug" ];then
+        target_file="/tmp/ns_debugmode"
+        default_data=$DEBUG_MODE
+    elif [ "$Param2" = "detect" ];then
+        target_file="/tmp/ns_disabledetect"
+        default_data=$DISABLE_DETECT
+    else
+        fmt_print "console" $ERROR "Invalid Property : $Param2"
+        exit 1
+    fi
+
+    if [ "$Param1" = "get" ];then
+        if [ -e "$target_file" ];then
+            tmpdata=`cat $target_file`
+            fmt_print "console" $INFO "$Param2 : $tmpdata"
+        else
+            fmt_print "console" $INFO "$Param2 : $default_data"
+        fi
+    else
+        echo $Param3 > $target_file
+        fmt_print "console" $INFO "Set $Param3 -> $Param2 successfully"
+    fi
+
+    exit 0
+}
+
+load_properties_from_cache(){
+    if [ -e "/tmp/ns_servertype" ];then
+        server_type=`cat /tmp/ns_servertype`
+    fi
+
+    if [ -e "/tmp/ns_debugmode" ];then
+        DEBUG_MODE=`cat /tmp/ns_debugmode`
+    fi
+
+    if [ -e "/tmp/ns_disabledetect" ];then
+        DISABLE_DETECT=`cat /tm/ns_disabledetect`
+    fi
+}
+
 # According to boardid, parse server_type
 try_get_server_type(){
     if [ -e "/tmp/ns_servertype" ];then
@@ -283,10 +340,14 @@ init_debuglog(){
     fmt_print "log" $INFO "Debug Mode : $DEBUG_MODE"
     fmt_print "log" $INFO "Disable Detect : $DISABLE_DETECT"
 
-    if [ "$nic_slot" = "detect" ];then
+    if [ "$Param1" = "detect" ];then
         fmt_print "log" $INFO "Operation Type : i2c detect"
-    elif [ "$nic_slot" = "version" ];then
+    elif [ "$Param1" = "version" ];then
         fmt_print "log" $INFO "Operation Type : get version"
+    elif [ "$Param1" = "get" ];then
+        fmt_print "log" $INFO "Operation Type : get property value"
+    elif [ "$Param1" = "set" ];then
+        fmt_print "log" $INFO "Operation Type : set property value"
     elif [ $param_num -lt 2 ];then
         fmt_print "log" $INFO "Operation Type : help info"
     else
@@ -346,6 +407,11 @@ switch_pca9548_channel(){
 pre_exec_hook(){
     init_debuglog
 
+    if [ "$Param1" = "get" ] || [ "$Param1" = "set" ];then
+        get_set_properties
+    fi
+
+    load_properties_from_cache
     # check server_type if is auto
     # if in debug mode, skip this check
     if [ "$server_type" = "auto" ] && [ $DEBUG_MODE -eq 0 ];then
@@ -353,7 +419,7 @@ pre_exec_hook(){
     fi
 
     # is param legel?
-    if [ "$sensor_type" = "chip" ];then
+    if [ "$Param2" = "chip" ];then
         if [ $param_num -le 3 ];then
             fmt_print "console" $ERROR "Command Format illegal"
             echo "Command Format  : ./nicsensor.sh [slot] chip [slave] [i2c_command]"
@@ -362,7 +428,7 @@ pre_exec_hook(){
     fi
 
     # if the action is fru write, need pre-process fru data
-    if [ "$sensor_type" = "fru" ];then
+    if [ "$Param2" = "fru" ];then
         if [ "$option_data" = "write" ];then
             fmt_print "log" $INFO "Opreation FRU Write"
             

readme.md

@@ -7,22 +7,23 @@
 
 - [nicsensor工具使用说明](#nicsensor工具使用说明)
   - [目录](#目录)
-  - [1 简介](#1_简介)
-  - [2 使用方法](#2_使用方法)
-    - [2.1 传感器读取](#2_1_传感器读取)
-    - [2.2 FRU相关操作](#2_2_fru相关操作)
-    - [2.3 命令透传](#2_3_命令透传)
-    - [2.4 插槽I2C信息遍历](#2_4_插槽i2c信息遍历)
-    - [2.5 调试模式使用](#2_5_调试模式使用)
-    - [2.6 扩展功能](#2_6_扩展功能)
-  - [3 常见问题](#3_常见问题)
-    - [3.1 ADC128传感器读值为0](#3_1_adc128传感器读值为0)
-    - [3.2 脚本执行时出现大批量语法错误](#3_2_脚本执行时出现大批量语法错误)
-  - [4 附属工具](#4_附属工具)
-    - [4.1 FruParse](#4_1_fruparse)
-  - [5 关于nicsensor_v2](#5_关于nicsensor_v2)
-  - [6 附录](#6_附录)
-    - [6.1 Project变量说明](#6_1_project变量说明)
+  - [1\_简介](#1_简介)
+  - [2\_使用方法](#2_使用方法)
+    - [2\_1\_传感器读取](#2_1_传感器读取)
+    - [2\_2\_FRU相关操作](#2_2_fru相关操作)
+    - [2\_3\_命令透传](#2_3_命令透传)
+    - [2\_4\_插槽I2C信息遍历](#2_4_插槽i2c信息遍历)
+    - [2\_5\_调试模式使用](#2_5_调试模式使用)
+    - [2\_6\_扩展功能](#2_6_扩展功能)
+    - [2\_7\_设定配置功能](#2_7_设定配置功能)
+  - [3\_常见问题](#3_常见问题)
+    - [3\_1\_ADC128传感器读值为0](#3_1_adc128传感器读值为0)
+    - [3\_2\_脚本执行时出现大批量语法错误](#3_2_脚本执行时出现大批量语法错误)
+  - [4\_附属工具](#4_附属工具)
+    - [4\_1\_FruParse](#4_1_fruparse)
+  - [5\_关于nicsensor\_v2](#5_关于nicsensor_v2)
+  - [6\_附录](#6_附录)
+    - [6\_1\_Project变量说明](#6_1_project变量说明)
 
 ## 1_简介
 
@@ -144,6 +145,30 @@ nicsensor工具是在带有i2ctool工具(i2ctransfer、i2cdetect)的BMC下用于
 
 在 `handle_reserve` 中可以自定义需要对网卡实现的功能。在调用该函数之前脚本会将 PCA9641及PCA9548选通。扩展功能时无需考虑PCA9641和PCA9548的状态。
 
+### 2_7_设定配置功能
+
+> [!warning]
+> 版本要求: 
+> - 测试版本 1.7.7 以上
+> - 正式版本 1.8 及以上
+
+可以通过一组名为 `get/set` 的指令对脚本中的如下变量做即时修改而无需修改脚本本体。支持修改的变量如下：
+- `server_type`    : 对应属性值缩写 `server`
+- `DEBUG_MODE`     : 对应属性值缩写 `debug`
+- `DISABLE_DETECT` : 对应属性值缩写 `detect`
+
+**命令格式**
+``` shell
+./nicsensor.sh <get/set> <property> <value>
+```
+
+**命令示例**
+``` shell
+./nicsensor.sh set server 5280m7
+
+./nicsneosr.sh get debug
+```
+
 ## 3_常见问题
 
 ### 3_1_ADC128传感器读值为0