diff --git a/02.nicsensor/change_list.txt b/02.nicsensor/change_list.txt
index 63359a2..c528b1c 100644
--- a/02.nicsensor/change_list.txt
+++ b/02.nicsensor/change_list.txt
@@ -1,6 +1,7 @@
 # Script Version 1.3
   Release Note
     1.[新增功能]支持5280m7的OCP卡的使用
+    2.[新增功能]支持传感器tmp468和tmp112
 
 # Script Version 1.2 20241102
   Release Note:
diff --git a/02.nicsensor/nicsensor.sh b/02.nicsensor/nicsensor.sh
index 717cabd..090340f 100644
--- a/02.nicsensor/nicsensor.sh
+++ b/02.nicsensor/nicsensor.sh
@@ -50,6 +50,9 @@ TMP468_Channel6_name="Remote6"
 TMP468_Channel7_name="Remote7"
 TMP468_Channel8_name="Remote8"
 
+# TMP112 sensor name
+TMP112_Sensor_name="tmp112"
+
 # fru basic offset
 fru_offset="0x00 0x00"
 
@@ -130,7 +133,7 @@ ina3221_ch2_volt="0"
 ina3221_ch0_current="0"
 ina3221_ch1_current="0"
 ina3221_ch2_current="0"
-SCRIPT_VERSION="1.3 Intest Rev4"
+SCRIPT_VERSION="1.3 Intest Rev5"
 
 fru_file_name=$option_data2
 fru_write_size=0
@@ -150,7 +153,7 @@ print_usage(){
     echo "    Command Format  : ./nicsensor.sh [slot] [sensor tpye] [slave]"
     echo "    Option Detail"
     echo "      [slot]        : 0 1 2 3 4 5 ..."
-    echo "      [sensor type] : emc1413, adc128, ina3221 tmp468"
+    echo "      [sensor type] : emc1413, adc128, ina3221, tmp468, tmp112"
     echo "      [slave]       : chip slave address , please provide 7 bit address"
     echo "    E.G.            : ./nicsensor.sh 0 adc128 0x1f"
     echo ""
@@ -880,17 +883,54 @@ process_tmp468(){
 # ---------------------------------------------------------
 #  Chip TMP112
 # ---------------------------------------------------------
+# @Param1 tmp112 data high 8bit
+# @Param2 tmp112 data low 8bit
+# @Param3 customization sensor name
+convert_tmp112_data(){
+    hex_value1=$(echo "$1" | awk '{sub(/^0x/,""); print}')
+    hex_value2=$(echo "$2" | awk '{sub(/^0x/,""); print}')
+    merge_value="${hex_value1}${hex_value2}"
 
-# read_tmp112_value(){
-     
-# }
+    # bc calculator recognized upper case only, change data to upper case
+    upper_hex_value=$(echo "$merge_value" | awk '{ 
+        for(i=1; i<=length($0); i++){ 
+            if(tolower(substr($0,i,1)) ~ /^[a-f]$/) 
+                printf toupper(substr($0,i,1)); 
+            else 
+                printf substr($0,i,1); 
+        } 
+        print "" 
+    }')
 
-# process_tmp112(){
-#     # tmp112 no need to init firsts
+    # change data from hex to dec
+    dec_val=$(echo "ibase=16; $upper_hex_value" | bc)
 
-#     # get chip tmp112 value
-#     read_tmp112_value
-# }
+    binary_number=$(echo "ibase=16;obase=2;$upper_hex_value" | bc)
+    last_digit=$(echo $binary_number | cut -c 16)
+    if [ $last_digit -eq 0 ];then
+        temp=$(echo "scale=4; $dec_val / 16 * 0.0625" | bc)
+    elif [ $last_digit -eq 1];then
+        temp=$(echo "scale=4; ( $dec_val - 1 ) / 8 * 0.0625" | bc)
+    fi
+
+    echo "$3 : $temp"
+}
+
+read_tmp112_value(){
+    format_log_print $INFO "Start Read tmp112 channel data ..."
+    res_tmp112=`i2ctransfer -y $i2c_bus w1@$chip_slave $REG_tmp112 r2`
+    format_log_print $INFO "Tmp112 raw data: $res_tmp112"
+
+    format_print $INFO "Tmp112 read result:"
+    convert_tmp112_data $res_tmp112 $TMP112_Sensor_name
+}
+
+process_tmp112(){
+    # tmp112 no need to init firsts
+
+    # get chip tmp112 value
+    read_tmp112_value
+}
 # ---------------------------------------------------------
 #  CHIP
 # ---------------------------------------------------------
@@ -1040,6 +1080,9 @@ start_get_sensor(){
         "tmp468")
             process_tmp468
             ;; 
+        "tmp112")
+            process_tmp112
+            ;;
         "chip")
             process_chip
             ;;
@@ -1047,7 +1090,7 @@ start_get_sensor(){
             process_fru
             ;;
         *)
-            format_print $ERROR "Unsupport Sensor Type !!!"
+            format_print $ERROR "Unsupport Sensor Type !!! - $sensor_type"
             print_usage
             ;;
     esac
diff --git a/02.nicsensor/readme.txt b/02.nicsensor/readme.txt
index a231dcd..eee4fd0 100644
--- a/02.nicsensor/readme.txt
+++ b/02.nicsensor/readme.txt
@@ -36,7 +36,7 @@
             
             参数说明:
                 pcie_slot : 网卡所在的PCIE槽位, 填数字0,1,2,3,4,5
-                chip_type : 传感器芯片的类型, emc1413,adc128,ina3221
+                chip_type : 传感器芯片的类型, emc1413,adc128,ina3221,tmp268,tmp112
                 chip_slave: 传感器芯片的I2C地址(7bit)
             
             举例说明:读取PCIE 1 上网卡的adc128芯片, 芯片slave地址为0x1f